S1 Pro+ Line Out to a Third Party Device
Connect the S1 Pro+ Line Out to a third-party device
Send the output of the S1 Pro+ to another system like a mixer or another powered loudspeaker. You can do this when you want to use the S1 Pro+ as a personal monitor (connecting your microphone and instrument to the S1 Pro+) and sending the combined signal (what you hear) to another device.
If the device (like a third-party mixer or powered loudspeaker) has an XLR input, the connection is simple. Use a standard XLR cable (microphone cable).
Note: The S1 Pro+ Line Out is LINE LEVEL, and this may be too hot (level is too high) for a Microphone-level input.
Connection to Mixers
- Connect the Line Out from an S1 Pro+ to one of the inputs on the mixer.
If the mixer has a MIC/LINE switch, use LINE.
If the mixer has a PAD switch, turn on the PAD.
Connection to Powered Loudspeakers
To connect an S1 Pro+ to another S1 Pro+ please see: S1 Pro+ Daisy Chain.
The same principles apply to connect to a third-party powered loudspeaker.
If the loudspeaker has a MIC/LINE switch, use LINE.
If the loudspeaker has a PAD switch, turn on the PAD.
Connection to Passive Loudspeakers
The S1 Pro+ Line Out will not drive a passive loudspeaker (one without an amplifier).