T1 ToneMatch® Audio Engine / USB / Controlling the Volume

Revision as of 11:00, 2 August 2008 by ST (talk | contribs) (New page: The default setup in the {{T1}} is that the USB from PC signal is routed to the Master output. If you need to set the volume relative to the other T1® Channels then you have to do that wi...)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

The default setup in the T1 ToneMatch Audio Engine is that the USB from PC signal is routed to the Master output. If you need to set the volume relative to the other T1® Channels then you have to do that with your USB device, probably a computer.

If you want to route the USB from PC to a T1® Channel, keep reading.

USB to PC

Prefs

Turn the main selector to Prefs.
Select USB from PC

[[Image:T1PrefsUSB.gif]

Set Left: Ch 4/5
Set Right: CH 4/5

Now the volume is controlled by the Channel 4/5 Vol control.

Retrieved from "https://boseperformer.com/index.php?title=T1_ToneMatch®_Audio_Engine_/_USB_/_Controlling_the_Volume&oldid=8018"