T1 ToneMatch® Audio Engine / Digital Delay for Second L1®

Here are some notes on how to use your T1™ to drive a main L1™ at the front of the house and a second L1™ farther back. The goal is to provide sound in a long room, in this case approximately 50 feet wide by 250 feet long.

Terms

Main L1™ is the one at the front of the house.
Secondary L1™ is the one farther back.

Connections

T1™ Inputs

1 Microphone
2 Microphone / Instrument or Mixer
3 Used for Digital Delay processing
4/5 USB input from Computer

T1™ Outputs

Tonemate™ (Ethercon Connection) goes to the Main L1&trade.
Main ¼ inch output goes to Channel 3 input.
Aux ¼ inch output goes to Secondary L1™ Analog Input

Turn down the Master Volume while making the following connections

Ordinary connections

Connect inputs for Channels 1, 2 and 4/5 in any way you like. Ensure that the setting for Aux is Mute for all.

http://bose.infopop.cc/eve/forums/a/ga/ul/1361096905/inlineimg/Y/DigitalDelay06.png

Channel 3 – Turn level down, Ch 3 Mute

We are setting the Level to zero and we will not change this while using Channel 3 for Digital Delay processing. We are setting the Mute as an additional precaution.

http://bose.infopop.cc/eve/forums/a/ga/ul/2721096905/inlineimg/Y/DigitalDelay04a.png