Template:T1 ToneMatch® Audio Engine to Model II and Compact

Usage:

{{T1 ToneMatch® Audio Engine to Two L1®s
|Model=Model II
}}

T1

L1 Model 1S

L1 Model II

S1 Pro

Please note: Bose recommends that if you have two Model 1S systems using the same source, that you place the Model 1S systems at least 20 feet apart (6 meters). This is to avoid Multiple Source Interference

Running a Model 1S system and L1 Compactwith the same source is running Dual Mono and not recommended unless the L1®s are at least 20 feet apart.

System 1 Connect the first system with the ToneMatch cable that came with the T1®. T1® ToneMatch port to the Model 1S Power Stand ToneMatch port.

Compact Connect the Compact with a ¼ inch jack Tip-Ring-Sleeve cable T1® Master Output to the L1 Compact Channel 2 input. Set the Channel 2 volume "5" and adjust as necessary to get a good balance with the other system. If you are seeing red on the Channel 2 LED light, turn down the volume on the Compact. If you are using Compact Channel 1, turn the Channel 1 volume all the way off. For best results use a Tip-Ring-Sleeve (balanced) connection. You can use a Tip-Sleeve (unbalanced connection) but the Tip-Ring-Sleeve (balanced connection is preferred).

---