T1® Stereo Sources

To connect a stereo source to a T1 ToneMatch Audio Engine see: Backing Tracks

Warning about Cables

If you use a cable like this to connect a stereo source to the T1 ToneMatch Audio Engine

• In Channels 1,2,3 you will hear only one side of the stereo source
• In Channels 4 or 5 the left and right channels from the source will tend to cancel each other out and you will get little or no output.

---

---

Corrections to the T1® Owners Guide pages 38 and 40

From the original diagrams it looks like this kind of cable may work.

Correction - use a cable like this

Original page (red x indicates error)

Correction - use a cable like this

Original page (red x indicates error)

Correction - use a cable like this

---