Template:ToneMatch Mixer Inputs

T4S ToneMatch mixer

T4S Inputs

• Channels 1, 2, 3, 4 XLR inputs are balanced.
• Channels 1, 2, 3, 4 ¼″ (6.3 mm) Tip‑Ring‑Sleeve jacks are balanced
  • They will accept 1/4 inch (6.35 mm) Tip-Sleeve jack Tip-Sleeve connections and the connections will be unbalanced.
• Channels 5 and 6 are balanced, but will accept 1/4 inch (6.35 mm) Tip-Sleeve jack Tip-Sleeve.
  If you use a 1/4 inch (6.3 mm) Tip-Ring-Sleeve from a balanced source, the connection will be balanced.
  If you use a 1/4 inch (6.3 mm) Tip-Ring-Sleeve from an unbalanced source, the connection will be unbalanced.
  If you use a 1/4 inch (6.35 mm) Tip-Sleeve from a balanced or unbalanced source, the connection will be unbalanced.

If you have a balanced source then using a balanced connection (XLR or 1/4 inch (6.3 mm) Tip-Ring-Sleeve) is preferable.

T8S ToneMatch mixer

T8S Inputs

• Channels 1, 2, 3, 4, 5, 6, 7, 8 XLR inputs are balanced.
• Channels 1, 2, 3, 4, 5, 6, 7, 8 ¼″ (6.3 mm) Tip‑Ring‑Sleeve jacks are balanced
  • They will accept 1/4 inch (6.35 mm) Tip-Sleeve jack Tip-Sleeve connections and the connections will be unbalanced.
• Channels 9 and 10 are balanced, but will accept 1/4 inch (6.35 mm) Tip-Sleeve jack Tip-Sleeve.
  If you use a 1/4 inch (6.3 mm) Tip-Ring-Sleeve from a balanced source, the connection will be balanced.
  If you use a 1/4 inch (6.3 mm) Tip-Ring-Sleeve from an unbalanced source, the connection will be unbalanced.
  If you use a 1/4 inch (6.35 mm) Tip-Sleeve from a balanced or unbalanced source, the connection will be unbalanced.

If you have a balanced source then using a balanced connection (XLR or 1/4 inch (6.3 mm) Tip-Ring-Sleeve) is preferable.

---