External Subwoofers: Difference between revisions

Line 8:

==== {{Model II nl}}====

{{#lst:L1® Model II Power Stand / Bass Line Out|Bass Module Output}}

=== Active (powered) Loudspeakers===

Using powered loudspeakers with any of the {{L1}} systems is not supported. ~~{{Bose}} does have the~~ [[PackLite® power amplifier Model A1]] ~~which~~ can be used to power up to two {{B1}}s. This is connected ~~through~~ the Power Stand Bass Line Out (applies to {{Classic nl}}, {{Model I nl}}, {{Model II nl}}.

Using powered loudspeakers with any of the {{L1 nl}} systems is not supported. The [[PackLite® power amplifier Model A1]] is part the {{l1 nl}} System. It can be used to power up to two {{B1}}s. This is connected to the Power Stand Bass Line Out (applies to {{Classic nl}}, {{Model I nl}}, {{Model II nl}}.

If you want to use a powered loudspeaker system, you can use the Power Stand Bass Line Out. Here are the ~~relevant notes depending on which model of~~ {{L1 nl}} you are using.

If you want to use a powered loudspeaker system, you can use the Power Stand Bass Line Out as the signal source. Here are notes specific to the {{L1 nl}} you are using.

* [[PS1 Power Stand / Bass Line Out|Model I or Classic Bass Line Out]]

Line 20:

Line 19:

You will probably use an ~~external~~ powered loudspeaker in the same way as you would connect ~~and~~ [[A1|PackLite®]] amp.

You will probably use an powered loudspeaker in the same way as you would connect an [[A1|PackLite®]] amp.

Please see [[PackLite® power amplifier Model A1]] for extensive notes that include ideas that can be applied to other systems.

@@ Line 8: / Line 8: @@
 ==== {{Model II nl}}====
 {{#lst:L1® Model II Power Stand / Bass Line Out|Bass Module Output}}
 === Active (powered) Loudspeakers===
-Using powered loudspeakers with any of the {{L1}} systems is not supported. {{Bose}} does have the [[PackLite® power amplifier Model A1]] which can be used to power up to two {{B1}}s. This is connected through the Power Stand Bass Line Out (applies to {{Classic nl}}, {{Model I nl}}, {{Model II nl}}.
+Using powered loudspeakers with any of the {{L1 nl}} systems is not supported. The [[PackLite® power amplifier Model A1]] is part the {{l1 nl}} System. It can be used to power up to two {{B1}}s. This is connected to the Power Stand Bass Line Out (applies to {{Classic nl}}, {{Model I nl}}, {{Model II nl}}.
-If you want to use a powered loudspeaker system, you can use the Power Stand Bass Line Out. Here are the relevant notes depending on which model of {{L1 nl}} you are using.
+If you want to use a powered loudspeaker system, you can use the Power Stand Bass Line Out as the signal source. Here are notes specific to the {{L1 nl}} you are using.
 * [[PS1 Power Stand / Bass Line Out|Model I or Classic Bass Line Out]]
@@ Line 20: / Line 19: @@
-You will probably use an external powered loudspeaker in the same way as you would connect and [[A1|PackLite&reg;]] amp.
+You will probably use an powered loudspeaker in the same way as you would connect an [[A1|PackLite&reg;]] amp.
 Please see [[PackLite® power amplifier Model A1]] for extensive notes that include ideas that can be applied to other systems.