Connections / DJ VJ Computer to Model I: Difference between revisions
m == R1 Remote == |
m links to mixers, R1 Remote, Presets |
||
| Line 7: | Line 7: | ||
For the following discussion we will call your console or computer your "Device". | For the following discussion we will call your console or computer your "Device". | ||
== Presets == | == [[Presets]] == | ||
For prerecorded music playback try these [[Presets]] | For prerecorded music playback try these [[Presets]] | ||
* 00 Flat | * 00 Flat | ||
| Line 13: | Line 13: | ||
* 58 High Volume (included in [[Presets 3.0]]) | * 58 High Volume (included in [[Presets 3.0]]) | ||
== Mixers / Mixing Desks == | == [[Mixers|Mixers / Mixing Desks]] == | ||
* [[Mixers]] We have detailed connection notes for several mixers. | * [[Mixers]] We have detailed connection notes for several mixers. | ||
== R1 Remote == | == [[R1 Remote]] == | ||
For this kind of application the R1 Remote is recommended especially if you want overall control of volume and tone in one handy place. If your device does this well you may not need the R1 Remote. | For this kind of application the R1 Remote is recommended especially if you want overall control of volume and tone in one handy place. If your device does this well you may not need the R1 Remote. | ||
Revision as of 18:50, 30 December 2007
Here are several ways to connect your L1 Classic or L1 Model I to
- DJ console or mixer or mixing desk
- VJ console or mixer or mixing desk
- Computer or mixer or mixing desk
For the following discussion we will call your console or computer your "Device".
For prerecorded music playback try these Presets
- 00 Flat
- 57 Low Volume (included in Presets 2.0)
- 58 High Volume (included in Presets 3.0)
- Mixers We have detailed connection notes for several mixers.
For this kind of application the R1 Remote is recommended especially if you want overall control of volume and tone in one handy place. If your device does this well you may not need the R1 Remote.
Mono Output from Device to Mono L1™
You can use a single B1 or two B1s depending on how much low end support you need for your application.
Stereo Output from Device to Mono L1™
You can use a single B1 or two B1s depending on how much low end support you need for your application. In this example we are showing two B1s. This is more common for modern backing tracks with plenty of bass, and for most venues.
Stereo Output to Stereo L1&trades;
Two L1™s will provide an excellent stereo image over a very wide "sweet spot".
Use the same settings for both L1™s
- Input Trim
- Preset