Mixer / Numark / CDMix-2: Difference between revisions

Line 5:

Simplest thing that could possibly work.

'''Use the ~~¼ inch~~ phone jack outputs (documented as 'to ~~powered monitors'~~) ~~not~~ the ~~XLR-to-XLR (PS1 Powerstand~~ Channels 1 or ~~2). If you want to use XLR - use a [[Pad]]~~.

'''Use the XLR Main Outputs to Power Stand Channels 1 and 2. Use a [[Pad]] for each channel

-= or =-

Use a converter or cable to use the RCA phone jack outputs (documented on page 2 of the manual as "to Powered Monitors"). You can connect a ¼ inch phone jack to any of the Power Stand Channels 1, 2, 3 or 4.

'''

Line 20:

Line 24:

To use these you will need an adapter or special cable to convert from RCA to ¼ inch phone jacks.

=== Which Power Stand Inputs ===

If you use XLR cables you may use these with Power Stand Channels 1 or 2.

-= or =-

If you use the '''¼ inch phone jack''' (Tip-Sleeve) inputs to

* The {{PS1}} Channels 1 or 2 if you want to use the [[Presets/Model I and Classic|Presets]] and the [[R1 Remote]] Tone and Level Controls <br /> OR <br />

* The {{PS1}} Channels 3 or 4 if you prefer to leave Channels 1 or 2 open for other inputs. You will have to control Tone and relative Level (between the Channels) at your input source, as you do not have this control over Channels 3 and 4 in the {{PS1}} or the [[R1 Remote]].

Links:

== Links ==

* [http://bose.infopop.cc/eve/forums/a/ga/ul/4371069053/NumarkCDMIX2.pdf Manual]

* http://bose.infopop.cc/eve/forums/a/ga/ul/9531079053/inlineimg/Y/NumarkCDMix2Out1a.gif

@@ Line 5: / Line 5: @@
 Simplest thing that could possibly work.
-'''Use the ¼ inch phone jack outputs (documented as 'to powered monitors') not the XLR-to-XLR (PS1 Powerstand Channels 1 or 2). If you want to use XLR - use a [[Pad]].
+'''Use the XLR Main Outputs to Power Stand Channels 1 and 2. Use a [[Pad]] for each channel
+-= or =-
+Use a converter or cable to use the RCA phone jack outputs (documented on page 2 of the manual as "to Powered Monitors"). You can connect a &frac14; inch phone jack to any of the Power Stand Channels 1, 2, 3 or 4.
 '''
@@ Line 20: / Line 24: @@
 To use these you will need an adapter or special cable to convert from RCA to &frac14; inch phone jacks.
+=== Which Power Stand Inputs ===
+If you use XLR cables you may use these with Power Stand Channels 1 or 2.
+-= or =-
+If you use the '''¼ inch phone jack''' (Tip-Sleeve) inputs to
+*  The {{PS1}} Channels 1 or 2 if you want to use the [[Presets/Model I and Classic|Presets]] and the [[R1 Remote]] Tone and Level Controls  <br /> OR <br />
+*  The {{PS1}} Channels 3 or 4 if you prefer to leave Channels 1 or 2 open for other inputs. You will have to control Tone and relative Level (between the Channels) at your input source, as you do not have this control over Channels 3 and 4 in the {{PS1}} or the [[R1 Remote]].
-Links:
+== Links ==
 * [http://bose.infopop.cc/eve/forums/a/ga/ul/4371069053/NumarkCDMIX2.pdf Manual]
 * http://bose.infopop.cc/eve/forums/a/ga/ul/9531079053/inlineimg/Y/NumarkCDMix2Out1a.gif