Effect / Alesis / NanoVerb: Difference between revisions

mNo edit summary
updated images for Alesis - one channel and two channels
Line 7: Line 7:
Excerpt from the Alesis NanoVerb Manual
Excerpt from the Alesis NanoVerb Manual


http://bose.infopop.cc/eve/forums/a/ga/ul/9501082142/inlineimg/Y/alesisNanoVerb1.gif
<!-- http://bose.infopop.cc/eve/forums/a/ga/ul/9501082142/inlineimg/Y/alesisNanoVerb1.gif -->
 
 
[[Image:alesisXVerbPS1-1Channel.png]]
 
Blue "Ring" is Send from the Bose System
Blue "Ring" is Send from the Bose System


Line 18: Line 22:
It seems that with the Nanoverb you can use two channels when you operate in "stereo" mode. But you cannot control the left and right channels independently. So you can maintain the separation between the channels but not have them running different levels, mix, or effects.
It seems that with the Nanoverb you can use two channels when you operate in "stereo" mode. But you cannot control the left and right channels independently. So you can maintain the separation between the channels but not have them running different levels, mix, or effects.


EDIT: Note - you will need an INSERT cable for each Bose Channel you want to run through your effects unit. (up to 2 max).
 
[[Image:alesisXVerbPS1-2Channel.png]]
 
Note - you will need an INSERT cable for each Bose Channel you want to run through your effects unit. (up to 2 max).


There is more discussion in the [http://bose.infopop.cc/eve/forums/a/tpc/f/301107819/m/9891067142 Original post in the Bose® Musicians Community Message Boards]  
There is more discussion in the [http://bose.infopop.cc/eve/forums/a/tpc/f/301107819/m/9891067142 Original post in the Bose® Musicians Community Message Boards]