Mixer / Yamaha / MX12/4: Difference between revisions

Line 11:

Simplest thing that could possibly work.

~~~~

''' {{Use1/4}} '''

or

''' {{UseXLR}} '''

But you will probably want to use a [[Pad]] for each channel.

== Outputs ==

Line 27:

Line 32:

for PS1 Powerstand Channel 1 or 2 inputs

The ¼ inch Console ~~outs~~ should work fine directly into the {{PS1}} Channels 1/2/3/4.

The ¼ inch Console should work fine directly into the {{PS1}} Channels 1/2/3/4. Note: this output is [[TRS|Tip-Ring-Sleeve]] (stereo output) so you will need a Tip-Ring-Sleeve to two Tip-Sleeve patch cord to maintain the separation of the left and right channels.

This Mixer also has Four group outputs (busses).

Line 34:

Line 41:

Links:

* [http://www2.yamaha.co.jp/manual/pdf/pa/english/mixers/MX12_4E.pdf Yamaha MX12/4 Manual]

* ~~link to an image from~~ the ~~manual~~

* Page 6 in the Manual showing outputs. #7 highlighted is the Stereo Console out. <br />[[Image:YamahaMX124Out1.gif]]

* ~~link~~ to ~~an image from~~ the ~~manual~~

* Page 6 in the Manual showing outputs. #6 highlighted are the ¼ inch group outputs. <br />[[Image:YamahaMX124Out2.gif]]

* Page 6 in the Manual showing outputs. #5 highlighted are the [[XLR]] balanced outputs. These output +4 dBU nominal and are likely too hot for direct input to the XLR inputs on the {{PS1}}. Use [[Pad]]s.<br />[[Image:YamahaMX124Out3.gif]]

More Notes

@@ Line 11: / Line 11: @@
 Simplest thing that could possibly work.
-<!-- ''' {{Use1/4}} ''' -->
+''' {{Use1/4}} '''
+or
 ''' {{UseXLR}} '''
+But you will probably want to use a [[Pad]] for each channel.
 == Outputs ==
 <!-- delete anything that is not applicable -->
@@ Line 27: / Line 32: @@
 for PS1 Powerstand Channel 1 or 2 inputs
-The &frac14; inch Console outs should work fine directly into the {{PS1}} Channels 1/2/3/4.
+The &frac14; inch Console should work fine directly into the {{PS1}} Channels 1/2/3/4. Note: this output is [[TRS|Tip-Ring-Sleeve]] (stereo output) so you will need a Tip-Ring-Sleeve to two Tip-Sleeve patch cord to maintain the  separation of the left and right channels.
+This Mixer also has Four group outputs (busses).
 {{RunTROrTRSUnbalanced}}
@@ Line 34: / Line 41: @@
 Links:
 * [http://www2.yamaha.co.jp/manual/pdf/pa/english/mixers/MX12_4E.pdf Yamaha MX12/4 Manual]
-* link to an image from the manual
+* Page 6 in the Manual showing outputs. #7 highlighted is the Stereo Console out. <br />[[Image:YamahaMX124Out1.gif]]
-* link to an image from the manual
+* Page 6 in the Manual showing outputs. #6 highlighted are the &frac14; inch group outputs. <br />[[Image:YamahaMX124Out2.gif]]
+* Page 6 in the Manual showing outputs. #5 highlighted are the [[XLR]] balanced outputs. These output +4 dBU nominal and are likely too hot for direct input to the XLR inputs on the {{PS1}}. Use [[Pad]]s.<br />[[Image:YamahaMX124Out3.gif]]
 More Notes