Kemper Profiler Player with Digitech Trio+: Difference between revisions

← Older edit Newer edit →

VisualWikitext

@@ Line 3: / Line 3: @@
+===Overview ===
 The Kemper Profiler Player (KPP) connections to Digitech Trio+ (Trio+)
 *Trio+ FX SEND (Trio+ top left) goes to KPP Input
 *KPP Monitor Out (with KPP Output Monitor Source set to Master Mono) goes to Trio+ FX RETURN (Trio+ top right). It doesn't matter which KPP output you connect to (Left or Right).
+=== Concepts ===
+This setup lets the Trio+ generate its backing track from your clean guitar and apply the full Kemper sound to what you hear and record.
+=== Step by Step ===
+#Plug your guitar into the Trio+
+#Use a patch cable to connect Trio+ FX SEND to  Kemper Profiler Player Input.
+#Use a patch cable to connect  Kemper Profiler Player Monitor Out (set to Master Mono) to Trio+ FX RETURN.
+#Connect the Trio+ Mixer Out to your mixer or PA, OR connect your headphones to the Trio+ headphone output
+#Adjust output and return levels for clean, balanced sound.
 Notes:
@@ Line 11: / Line 24: @@
 ## When playing along Trio+ backing tracks you will hear the guitar signal processed by the KPP
 ## When using the Trio+ Looper the guitar signal that gets looped will include all KPP processing
-# The Mixer Output mix Trio+ Mixer Output) will add cabinet emulation to the guitar signal. Turn off the Cabinet in the KPP if you don't like the sound. I haven't found a way to disable the cabinet emulation in the Trio+.
+# The Mixer Output mix Trio+ Mixer Output) will add cabinet emulation to the guitar signal. Turn off the Cabinet in the KPP if you don't like the sound.
+In Rig Manager, Output section, set Monitor source to Master Mono