Sennheiser Wireless Rack: Difference between revisions

Line 20:

Details of the wireless rig.

*4 x [https://www.sennheiser.com/en-us/catalog/products/wireless-systems/ew-d-em/ew-d-em-q1-6-508800 Sennheiser EW-D EM] (single channel receivers = 4 channels)

* 4 x [https://www.sennheiser.com/en-us/catalog/products/wireless-systems/ew-d-em/ew-d-em-q1-6-508800 Sennheiser EW-D EM] (single channel receivers = 4 channels)

*2 x [https://www.sennheiser.com/en-us/catalog/products/wireless-systems/ew-dx-em-2/ew-dx-em-2-q1-9-509342 Sennheiser EW-DX EM 2] (dual receivers = 4 channels)

* 2 x [https://www.sennheiser.com/en-us/catalog/products/wireless-systems/ew-dx-em-2/ew-dx-em-2-q1-9-509342 Sennheiser EW-DX EM 2] (dual receivers = 4 channels)

* [https://www.sennheiser.com/en-us/catalog/products/wireless-systems/ew-d-asa/ew-d-asa-470---694-mhz-508879 Sennheiser EW-ASA] (antenna splitter)

* 1 x [https://www.sennheiser.com/en-us/catalog/products/wireless-systems/ew-d-asa/ew-d-asa-470---694-mhz-508879 Sennheiser EW-ASA] (antenna splitter)

*Front panel antenna kit with 1/2 wave dipole antennas

* Front panel antenna kit with 1/2 wave dipole antennas

*To be added: Another antenna splitter and external antennas, but for now, this is performing exceedingly well

* To be added: Another antenna splitter and external antennas, but for now, this is performing exceedingly well

~~== T8S and T4S ==~~

~~;T8S~~

~~: Primarily for wireless receivers.~~

~~;T4S~~

~~: For additional connections, such as a host headset microphone using the Sennheiser AVX system or emergency wired connections.~~

~~=== Connections ===~~

~~;Main Outputs~~

~~:The T8S Main Outputs Left and Right connect to the T4S Aux Inputs 5/6 (panned hard left and right) using 1/4 inch (6.3 mm) Tip-Ring-Sleeve balanced cables.~~

:The T4S ToneMatch ports connect to two L1 Pro32 systems using 50-foot (15-meter) CAT-7 cables. These are heavy-duty, shielded Outdoor Cat 7 Ethernet Cables (26AWG), preferred for their durability on stage. Lighter-duty cables can also be used.

~~=== T8S Noise Gate ===~~

~~;Settings~~

~~:The T8S Comp/Gate | Noise Gate is set with an aggressive -35 dB threshold. This setting shuts down each microphone when not in use, minimizing feedback and stage bleed from open microphones.~~

== The Microphones ==

Line 72:

Line 56:

:These are used for instrument inputs like guitars, basses, or keyboards.

== T8S and T4S ==

;T8S

: Primarily for wireless receivers.

;T4S

: For additional connections, such as a host headset microphone using the Sennheiser AVX system or emergency wired connections.

=== Connections ===

;Main Outputs

:The T8S Main Outputs Left and Right connect to the T4S Aux Inputs 5/6 (panned hard left and right) using 1/4 inch (6.3 mm) Tip-Ring-Sleeve balanced cables.

:The T4S ToneMatch ports connect to two L1 Pro32 systems using 50-foot (15-meter) CAT-7 cables. These are heavy-duty, shielded Outdoor Cat 7 Ethernet Cables (26AWG), preferred for their durability on stage. Lighter-duty cables can also be used.

=== T8S Noise Gate ===

;Settings

:The T8S Comp/Gate | Noise Gate is set with an aggressive -35 dB threshold. This setting shuts down each microphone when not in use, minimizing feedback and stage bleed from open microphones.

@@ Line 20: / Line 20: @@
 Details of the wireless rig.
-*4 x [https://www.sennheiser.com/en-us/catalog/products/wireless-systems/ew-d-em/ew-d-em-q1-6-508800 Sennheiser EW-D  EM] (single channel receivers = 4 channels)
+* 4 x [https://www.sennheiser.com/en-us/catalog/products/wireless-systems/ew-d-em/ew-d-em-q1-6-508800 Sennheiser EW-D  EM] (single channel receivers = 4 channels)
-*2 x [https://www.sennheiser.com/en-us/catalog/products/wireless-systems/ew-dx-em-2/ew-dx-em-2-q1-9-509342 Sennheiser EW-DX EM 2] (dual receivers = 4 channels)
+* 2 x [https://www.sennheiser.com/en-us/catalog/products/wireless-systems/ew-dx-em-2/ew-dx-em-2-q1-9-509342 Sennheiser EW-DX EM 2] (dual receivers = 4 channels)
-* [https://www.sennheiser.com/en-us/catalog/products/wireless-systems/ew-d-asa/ew-d-asa-470---694-mhz-508879  Sennheiser EW-ASA] (antenna splitter)
+* 1 x [https://www.sennheiser.com/en-us/catalog/products/wireless-systems/ew-d-asa/ew-d-asa-470---694-mhz-508879  Sennheiser EW-ASA] (antenna splitter)
-*Front panel antenna kit with 1/2 wave dipole antennas
+* Front panel antenna kit with 1/2 wave dipole antennas
-*To be added: Another antenna splitter and external antennas, but for now, this is performing exceedingly well
+* To be added: Another antenna splitter and external antennas, but for now, this is performing exceedingly well
-== T8S and T4S ==
-;T8S
-: Primarily for wireless receivers.
-;T4S
-: For additional connections, such as a host headset microphone using the Sennheiser AVX system or emergency wired connections.
-=== Connections ===
-;Main Outputs
-:The T8S Main Outputs Left and Right connect to the T4S Aux Inputs 5/6 (panned hard left and  right) using 1/4 inch (6.3 mm) Tip-Ring-Sleeve balanced cables.
-:The T4S ToneMatch ports connect to two L1 Pro32 systems using 50-foot (15-meter) CAT-7 cables. These are heavy-duty, shielded Outdoor Cat 7 Ethernet Cables (26AWG), preferred for their durability on stage. Lighter-duty cables can also be used.
-=== T8S Noise Gate ===
-;Settings
-:The T8S Comp/Gate | Noise Gate is set with an aggressive -35 dB threshold. This setting shuts down each microphone when not in use, minimizing feedback and stage bleed from open microphones.
 == The Microphones ==
@@ Line 72: / Line 56: @@
 :These are used for instrument inputs like guitars, basses, or keyboards.
+== T8S and T4S ==
+;T8S
+: Primarily for wireless receivers.
+;T4S
+: For additional connections, such as a host headset microphone using the Sennheiser AVX system or emergency wired connections.
+=== Connections ===
+;Main Outputs
+:The T8S Main Outputs Left and Right connect to the T4S Aux Inputs 5/6 (panned hard left and  right) using 1/4 inch (6.3 mm) Tip-Ring-Sleeve balanced cables.
+:The T4S ToneMatch ports connect to two L1 Pro32 systems using 50-foot (15-meter) CAT-7 cables. These are heavy-duty, shielded Outdoor Cat 7 Ethernet Cables (26AWG), preferred for their durability on stage. Lighter-duty cables can also be used.
+=== T8S Noise Gate ===
+;Settings
+:The T8S Comp/Gate | Noise Gate is set with an aggressive -35 dB threshold. This setting shuts down each microphone when not in use, minimizing feedback and stage bleed from open microphones.