T1 Compatibility With L1 Pro Systems: Difference between revisions

Line 1:

;Question: Can I use the {{T1}} with the {{L1PS}}s?

[[File:T1 to L1 Pro.jpg|600px|right]]

;Answer: Yes using two connections

;Connections and initial settings

# On the L1 Pro, turn off the system and turn down the volume on all channels

# On the {{T1}}, turn the Master Volume off

# Power: Connect the {{L1P}} ToneMatch port to the {{T1}} ToneMatch port using the ToneMatch cable

# Audio: Connect the {{T1}} Master Output to the {{L1P}} channel 3 unless you are already using it for Bluetooth or another sound source. This leaves channels 1 and 2 open for other sound sources.

Line 9:

Line 13:

#***Turn off Reverb

#***Set Bass and Treble to 12:00 o'clock

#* For best results, use a 1/4 inch (6.3 mm) Tip-Ring-Sleeve cable for a [[Balanced_vs_Unbalanced#Balanced_Connections_Preferred_When_Possible|balanced connection]] [[File:14trstotrs.jpg|200px|right]]

#* '''For best results''', use a 1/4 inch (6.3 mm) Tip-Ring-Sleeve cable for a [[Balanced_vs_Unbalanced#Balanced_Connections_Preferred_When_Possible|balanced connection]] [[File:14trstotrs.jpg|200px|right]]

;Power up and gain staging

: Summary: Set the L1 Pro channel volume and the {{T1}} Master Volume to 12:00 o'clock and adjust from there as necessary

;Details

# Turn on the L1 Pro (normally you would turn on the power amplifier last, but you need it turned on to power the {{T1}}

# On the {{T1}}

#* Attach a signal source to one of the {{T1}}, e.g., a microphone

#* Turn on the power

#* Turn up the Trim until you see a solid green light on the channel trim

#* Turn up the channel volume to 12:00 o'clock

# On the L1 Pro

#* Turn up the volume on the channel to which you connected the {{T1}} to 12:00 o'clock

# On the {{T1}}

#* Turn up the Master volume to the desired level

@@ Line 1: / Line 1: @@
 ;Question: Can I use the {{T1}} with the {{L1PS}}s?
 [[File:T1 to L1 Pro.jpg|600px|right]]
 ;Answer: Yes using two connections
+;Connections and initial settings
+# On the L1 Pro, turn off the system and turn down the volume on all channels
+# On the {{T1}}, turn the Master Volume off
 # Power: Connect the {{L1P}} ToneMatch port to the {{T1}} ToneMatch port using the ToneMatch cable
 # Audio: Connect the {{T1}} Master Output to the {{L1P}} channel 3 unless you are already using it for Bluetooth or another sound source. This leaves channels 1 and 2 open for other sound sources.
@@ Line 9: / Line 13: @@
 #***Turn off Reverb
 #***Set Bass and Treble to 12:00 o'clock
-#* For best results, use a 1/4 inch (6.3 mm) Tip-Ring-Sleeve cable for a [[Balanced_vs_Unbalanced#Balanced_Connections_Preferred_When_Possible|balanced connection]] [[File:14trstotrs.jpg|200px|right]]
+#* '''For best results''', use a 1/4 inch (6.3 mm) Tip-Ring-Sleeve cable for a [[Balanced_vs_Unbalanced#Balanced_Connections_Preferred_When_Possible|balanced connection]] [[File:14trstotrs.jpg|200px|right]]
+;Power up and gain staging
+: Summary: Set the L1 Pro channel volume and the {{T1}} Master Volume to 12:00 o'clock and adjust from there as necessary
+;Details
+# Turn on the L1 Pro (normally you would turn on the power amplifier last, but you need it turned on to power the {{T1}}
+# On the {{T1}}
+#* Attach a signal source to one of the {{T1}}, e.g., a microphone
+#* Turn on the power
+#* Turn up the Trim until you see a solid green light on the channel trim
+#* Turn up the channel volume to 12:00 o'clock
+# On the L1 Pro
+#* Turn up the volume on the channel to which you connected the {{T1}} to 12:00 o'clock
+# On the {{T1}}
+#* Turn up the Master volume to the desired level
 <blockquote>