Template:L1 Model II with Sub1/Sub2: Difference between revisions

@@ Line 10: / Line 10: @@
 ====If you have a third-party mixer====
-#Connect a sub or aux line out to Sub1/Sub2 Input 1.
+#DO NOT connect Sub1/Sub2 to the L1 Model II Bass Line Out. That output is EQd for the B2 or B1.
+===== Mixer to Sub1/Sub2 to {{Model II}} =====
+#On the mixer route all inputs to a single mono output
+#Connect the mixer output to the Sub1/Sub2 Input 1
+#Connect the Sub1/Sub2 Line Out 1 to the {{Model II}} Analog Input
+#Set the {{Model II}} Analog Input Trim to 10:00 o'clock. You adjust to suit so you see solid green.
 #On the Sub1/Sub2 set the LPF setting to L1.
-#DON'T connect Sub1/Sub2 to the L1 Model II Bass Line Out. That output is EQd for the B2 or B1.
+===== Mixer to {{Model II}} and Sub =====
+This method is known as '''Aux Fed Sub'''
+#On the mixer route all inputs to a single mono output
+#Connect the mixer output to the {{Model II}} Analog Input
+#Set the {{Model II}} Analog Input Trim to 10:00 o'clock. You adjust to suit so you see solid green.
+#Connect the mixer Sub or Aux line out to Sub1/Sub2 Input 1.
+#On the Sub1/Sub2 set the LPF setting to L1.
 ----