L1® System Holistic View: Difference between revisions
applied templates / formatting |
m →The {{L1}} System: clarified the language in the first couple of paragraphs |
||
| Line 1: | Line 1: | ||
<big>''' A Holistic View of the L1&trade '''</big><ref>[http://bose.infopop.cc/groupee/forums/a/tpc/f/867107664/m/5551058832/r/5551058832 Originally appeared in the {{forum}}]</ref> | <big>''' A Holistic View of the L1&trade '''</big><ref>[http://bose.infopop.cc/groupee/forums/a/tpc/f/867107664/m/5551058832/r/5551058832 Originally appeared in the {{forum}}]</ref> | ||
== The {{L1}} System == | == The {{L1}} System (Physical) == | ||
Here is one way you can think about the {{L1}} System. | |||
[[Image:SpeakerPower01.gif]] | [[Image:SpeakerPower01.gif]] | ||
=== {{L1 CR}} as one loudspeaker === | |||
Think of the {{L1 CR}} (Yellow highlight) is a single loudspeaker with 24 drivers (2.5 inch)<ref name="HilmarSaid">[http://bose.infopop.cc/eve/forums/a/tpc/f/3976055944/m/8151078751?r=8511074851#8511074851 Quoting Hilmar-at-Bose]</ref> supplied by 500 watts. | |||
=== Two {{B1}}s as a one bass loudspeaker === | |||
Think of the pair of {{B1}}s (Purple highlight) is a single bass loudspeaker with 4 (6.5 inch)<ref name="HilmarSaid" /> drivers supplied by 250 watts. <ref>two {{B1}} loudspeakers connected draws up to 250 watts at 4 ohms</ref> | |||
That's 750 watts in total. | That's 750 watts in total. | ||
== The {{L1}} System (Amplifiers & Power) == | |||
[[Image:SpeakerPower02.gif]] | [[Image:SpeakerPower02.gif]] | ||
=== {{L1 CR}} === | |||
The {{L1 CR}} This is one loudspeaker that happens to break down into two pieces for travel. | |||
This is driven by two separate amps, but this is not important because under normal circumstances both amps are driven identically. One drives the top half of the {{L1 CR}} and the other drives the bottom half. Because the {{L1 CR}} should always be operated as a single unit, what happens when you break it down isn't relevant. | |||
=== {{B1}}s === | === {{B1}}s === | ||
If you break the pair of {{B1}}s in half, and use just one of them, it draws 125 watts.<ref>one {{B1}} loudspeaker connected draws up to 125 watts at 8 ohms</ref> | If you break the pair of {{B1}}s in half, and use just one of them, it draws 125 watts.<ref>one {{B1}} loudspeaker connected draws up to 125 watts at 8 ohms</ref> | ||
If you don't use the {{B1}}s at all, the amp that is normally used to drive them is idle. | If you don't use the {{B1}}s at all, the amp that is normally used to drive them is idle. | ||