Sennheiser EW IEM G4: Difference between revisions

Line 23:

== Sync Transmitter to Receiver(s) ==

===Scan and ~~transfer available frequencies~~ to the Receiver ===

===Scan and Transfer Available Frequencies to the Receiver ===

;On the SR IEM G4 Transmitter

#Open the Easy Setup menu item

Line 31:

;On the EK IEM G4 portable Receiver

#Perform a frequency scan on an EK IEM G4 portable receiver

#From the scan results on the receiver, select a frequency ~~bank~~ with enough free ~~channels~~.

#From the scan results on the receiver, select a frequency Bank with enough free Channels.

#Hold the infrared interface of the EK IEM G4 receiver in front of the infrared interface of an SR IEM G4 transmitter to transfer the scan results from the receiver to this transmitter.

#*You will have the opportunity to select a different channel (but you don't need to). Press the jog dial to confirm the ~~frequency~~ selection. #*You will see the message STORED.

#*You will have the opportunity to select a different channel (but you don't need to). Press the jog dial to confirm the Bank and Channel selection.

#*You will see the message STORED.

===To SYNC the Transmitter to the Receiver===

@@ Line 23: / Line 23: @@
 == Sync Transmitter to Receiver(s) ==
-===Scan and transfer available frequencies to the Receiver ===
+===Scan and Transfer Available Frequencies to the Receiver ===
 ;On the SR IEM G4 Transmitter
 #Open the Easy Setup menu item
@@ Line 31: / Line 31: @@
 ;On the EK IEM G4 portable Receiver
 #Perform a frequency scan on an EK IEM G4 portable receiver
-#From the scan results on the receiver, select a frequency bank with enough free channels.
+#From the scan results on the receiver, select a frequency Bank with enough free Channels.
 #Hold the infrared interface of the EK IEM G4 receiver in front of the infrared interface of an SR IEM G4 transmitter to transfer the scan results from the receiver to this transmitter.
-#*You will have the opportunity to select a different channel (but you don't need to). Press the jog dial to confirm the frequency selection. #*You will see the message STORED.
+#*You will have the opportunity to select a different channel (but you don't need to). Press the jog dial to confirm the Bank and Channel selection.
+#*You will see the message STORED.
 ===To SYNC the Transmitter to the Receiver===