Sennheiser EW IEM G4: Difference between revisions

Line 31:

# Find the "Mode" option, hit the set button, change the setting to "Focus", and hit the set button again to save it

# Scroll until you find "Exit" and hit set to leave the menu screen

# Now you are back on the main screen of the pack. ~~from~~ the main screen, you can now choose which mix you want to hear by panning left or right with the arrow keys. Hit the down arrow a few times until only mix #1 can be heard, or hit the up arrow a few times until only mix #2 can be heard. The arrows act as a crossfader between the two sources.

# Now you are back on the main screen of the pack. From the main screen, you can now choose which mix you want to hear by panning left or right with the arrow keys. Hit the down arrow a few times until only mix #1 can be heard, or hit the up arrow a few times until only mix #2 can be heard. The arrows act as a crossfader between the two sources.

# There is no limit to how many receiver packs can tune in to these 2 mono mixes you are transmitting, so if you have additional packs just set them to the same frequency and repeat steps 3-6 above.

# Just be aware that there may be a small amount of bleed from one channel into the other during quiet passages.

@@ Line 31: / Line 31: @@
 # Find the "Mode" option, hit the set button, change the setting to "Focus", and hit the set button again to save it
 # Scroll until you find "Exit" and hit set to leave the menu screen
-# Now you are back on the main screen of the pack. from the main screen, you can now choose which mix you want to hear by panning left or right with the arrow keys. Hit the down arrow a few times until only mix #1 can be heard, or hit the up arrow a few times until only mix #2 can be heard.  The arrows act as a crossfader between the two sources.
+# Now you are back on the main screen of the pack. From the main screen, you can now choose which mix you want to hear by panning left or right with the arrow keys. Hit the down arrow a few times until only mix #1 can be heard, or hit the up arrow a few times until only mix #2 can be heard.  The arrows act as a crossfader between the two sources.
 # There is no limit to how many receiver packs can tune in to these 2 mono mixes you are transmitting, so if you have additional packs just set them to the same frequency and repeat steps 3-6 above.
 #  Just be aware that there may be a small amount of bleed from one channel into the other during quiet passages.