T4S to L1 Pro and L1 Legacy: Difference between revisions

Line 3:

|RightBody = To connect the T4S to an L1 Pro (any model) and a [[Model II]] or [[Model 1S]] there are a couple of approaches.

The T4S has two ToneMatch Ports. If you use a T4S to control two identical L1 systems, then you can use both ToneMatch ports. However, if you have an L1 Pro (any model) and a [[Model II]] or [[Model 1S]] you may want to use the right ToneMatch port to the L1 Pro and the Analog Left Output to the [[Model II]] or [[Model 1S]]

The T4S has two ToneMatch Ports. If you use a T4S to control two identical L1 systems, then you can use both ToneMatch ports. However, if you have an L1 Pro (any model) and a [[Model II]] or [[Model 1S]] you may want to use the right ToneMatch port to the L1 Pro and the Analog Left Output to the [[Model II]] or [[Model 1S]]. See below for details about why you would choose one approach over the other.

|Categories =

Line 14:

== Digital and Analog Connection ==

Use this method if you are running stereo or ~~dual mono~~ and you need to adjust or balance the volumes of the two L1 systems.

Use this method if you are running stereo or [[Dual Mono]] and you need to adjust or balance the volumes of the two L1 systems.

* Use the ToneMatch cable (included with the T4S) to connect the Right digital output to the L1 Pro ToneMatch port. Power will be supplied by the L1 Pro

Line 24:

== Two Digital Connections ==

Use this method if you don't need to control the relative volumes of the two L1 systems. For example: If you are sending two inputs to the L1 Pro, and two inputs to the [[Model II]] or [[Model 1S]]. Then you will use the T4S channel PAN and volume controls to manage the mix.

Use this method if you don't need to control the relative volumes of the two L1 systems. This would be typical of a [[Multi Mono]] setup. For example: If you are sending two inputs to the L1 Pro, and two inputs to the [[Model II]] or [[Model 1S]]. Then you will use the T4S channel PAN and volume controls to manage the mix.

* Use the ToneMatch cable (included with the T4S) to connect the Right digital output to the L1 Pro ToneMatch port. Power will be supplied by the L1 Pro

@@ Line 3: / Line 3: @@
 |RightBody = To connect the T4S to an L1 Pro (any model) and a [[Model II]] or [[Model 1S]] there are a couple of approaches.
-The T4S has two ToneMatch Ports. If you use a T4S to control two identical L1 systems, then you can use both ToneMatch ports. However, if you have an L1 Pro (any model) and a [[Model II]] or [[Model 1S]] you may want to use the right ToneMatch port to the L1 Pro and the Analog Left Output to the [[Model II]] or [[Model 1S]]
+The T4S has two ToneMatch Ports. If you use a T4S to control two identical L1 systems, then you can use both ToneMatch ports. However, if you have an L1 Pro (any model) and a [[Model II]] or [[Model 1S]] you may want to use the right ToneMatch port to the L1 Pro and the Analog Left Output to the [[Model II]] or [[Model 1S]]. See below for details about why you would choose one approach over the other.
 |Categories =
@@ Line 14: / Line 14: @@
 == Digital and Analog Connection ==
-Use this method if you are running stereo or dual mono and you need to adjust or balance the volumes of the two L1 systems.
+Use this method if you are running stereo or [[Dual Mono]] and you need to adjust or balance the volumes of the two L1 systems.
 * Use the ToneMatch cable (included with the T4S) to connect the Right digital output to the L1 Pro ToneMatch port. Power will be supplied by the L1 Pro
@@ Line 24: / Line 24: @@
 == Two Digital Connections ==
-Use this method if you don't need to control the relative volumes of the two L1 systems. For example: If you are sending two inputs to the L1 Pro, and two inputs to the [[Model II]] or [[Model 1S]]. Then you will use the T4S channel PAN and volume controls to manage the mix.
+Use this method if you don't need to control the relative volumes of the two L1 systems. This would be typical of a [[Multi Mono]] setup. For example: If you are sending two inputs to the L1 Pro, and two inputs to the [[Model II]] or [[Model 1S]]. Then you will use the T4S channel PAN and volume controls to manage the mix.
 * Use the ToneMatch cable (included with the T4S) to connect the Right digital output to the L1 Pro ToneMatch port. Power will be supplied by the L1 Pro