Bose Portable PA Knowledge

T4S to L1 Pro and L1 Legacy: Difference between revisions

← Older editNewer edit →
ST (talk | contribs)
Bureaucrats, Interface administrators, Administrators
20,148 edits
VisualWikitext
mNo edit summary
mNo edit summary
Line 1: Line 1:
{{DivToc
{{DivToc
|RightHead = Introduction
|RightHead = Introduction
|RightBody = The T4S has two ToneMatch Ports. If you use a T4S to control two identical L1 systems, then you can use the ToneMatch ports. However, if you have an L1 Pro (any model) and an [[Model II]] or [[Model 1S]] you may want to use the right ToneMatch port to the L1 Pro and the Analog Left Output to the [[Model II]] or [[Model 1S]]
|RightBody = To connect the T4S to an L1 Pro (any model) and a [[Model II]] or [[Model 1S]] there are a couple of approaches.
 
The T4S has two ToneMatch Ports. If you use a T4S to control two identical L1 systems, then you can use both ToneMatch ports. However, if you have an L1 Pro (any model) and a [[Model II]] or [[Model 1S]] you may want to use the right ToneMatch port to the L1 Pro and the Analog Left Output to the [[Model II]] or [[Model 1S]]


|Categories =
|Categories =
Line 10: Line 12:
[[Category:Connections]]
[[Category:Connections]]
}}
}}
To connect the T4S to an L1 Pro (any model) and an [[Model II]] or [[Model 1S]]


=== Digital and Analog Connection ===
=== Digital and Analog Connection ===
Retrieved from "https://boseperformer.com/T4S_to_L1_Pro_and_L1_Legacy"