T8S XLR Outputs to House System: Difference between revisions
Created page with "The {{T8S}} XLR outputs are LINE LEVEL. If the house system XLR inputs are MIC LEVEL, the signal will be too hot. You've several ways to resolve the mismatch. Preferred appr..." |
mNo edit summary |
||
| Line 1: | Line 1: | ||
The {{T8S}} XLR outputs are LINE LEVEL. If the house system XLR inputs are MIC LEVEL, the signal will be too hot. You've several ways to resolve the mismatch. | The {{T8S}} XLR outputs are LINE LEVEL. If the house system mixer XLR inputs are MIC LEVEL, the {{T8S}} signal from the XLR outputs will be too hot. You've several ways to resolve the mismatch. | ||
Most house system mixers should have one of the three options below. On the house system: | |||
* Use the MIC/LINE or ATTENUATION switch to lower the input sensitivity to LINE LEVEL | |||
* Use the input trim and lower the input sensitivity | |||
* Use the 1/4 inch (6.3 mm) Tip-Ring-Sleeve LINE LEVEL input use the T8S 1/4 Tip-Ring-Sleeve output | |||
* Use a -20 dB attenuator pad to between the T8S and the house system | |||
On the house set system, set the input trim so you get a strong input signal without clipping. See the owners manual for the mixer for details.f | |||
---- | ---- | ||
[[Category:T8S]] | [[Category:T8S]] | ||
[[Category:Connections]] | [[Category:Connections]] | ||