Jazz Guitar: Difference between revisions - Bose Portable PA Knowledge

Line 1:

Recommended ToneMatch Presets for Jazz Guitars (semi-acoustic archtop electric guitars)

== ToneMatch Mixers ==

<html>

This is the same as Utility/Flat except it sets the[[ZEQ]] centers for Low, Mid, High to useful values for electric guitar.

Line 8:

Line 9:

Here's another one to try.

This sounds like you're running clean through a 12 inch loudspeaker in a guitar cabinet.

~~When you connect the ToneMatch mixer to the L1 Compact, set the ToneMatch switch to Line Level.~~

~~<html>~~

~~~~

~~<img alt="" src="http://toonz.ca/bose/wiki/images/a/a3/Compact_Channel_2_Line_Level.png" width="475" height="412" />~~

~~</html>~~

~~----~~

~~[[Category:ToneMatch]]~~

~~[[Category:Settings]]~~

~~[[Category:Guitar]]~~

== {{Compact}} ==

Connect your guitar directly to the {{Compact}} channel 2. Set the ToneMatch switch to Line Level (down position). This will give you the flattest response.

[[File:Compact_Channel_2_Line_Level.png]]

If you find the tone is too bassy, set the ToneMatch switch to Guitar (up position)

== {{S1}} ==

You may be closer to the {{S1}} than the other models above. Try all three ToneMatch Presets.

* Off - is flat

* Guitar - rolls of some bass

* Mic - more emphasis on vocal frequencies and low end roll off

[[File:S1_Pro_ToneMatch_Switch.jpg]]

~~</html>~~

----

[[Category:ToneMatch]]

[[Category:Settings]]

[[Category:Guitar]]

[[Category:S1]]

[[Category:L1]]

[[Category:Compact]]

@@ Line 1: / Line 1: @@
 Recommended ToneMatch Presets for Jazz Guitars (semi-acoustic archtop electric guitars)
+== ToneMatch Mixers ==
 <html>
-<img src="https://www.bosepro.community/fileSendAction/fcType/0/fcOid/25094437276992697/filePointer/25517068216465783/fodoid/25517068216465779/imageType/MEDIUM/inlineImage/true/mceclip0.png" /></html>
+<img src="https://www.bosepro.community/fileSendAction/fcType/0/fcOid/25094437276992697/filePointer/25517068216465783/fodoid/25517068216465779/imageType/MEDIUM/inlineImage/true/mceclip0.png" width="600px" /></html>
 <p>This is the same as Utility/Flat except it sets the[[ZEQ]] centers for Low, Mid, High to useful values for electric guitar.
@@ Line 8: / Line 9: @@
 Here's another one to try.
-<html><img src="https://www.bosepro.community/fileSendAction/fcType/0/fcOid/40582958971916900/filePointer/40442221462902638/fodoid/40442221462902634/imageType/MEDIUM/inlineImage/true/mceclip0.png" /></html>
+<html><img src="https://www.bosepro.community/fileSendAction/fcType/0/fcOid/40582958971916900/filePointer/40442221462902638/fodoid/40442221462902634/imageType/MEDIUM/inlineImage/true/mceclip0.png"  width="600px"/></html>
 <p>This sounds like you're running clean through a 12 inch loudspeaker in a guitar cabinet.</p>
-<p>When you connect the ToneMatch mixer to the L1 Compact, set the ToneMatch switch to Line Level.</p>
-<html>
-<p>
-<img alt="" src="http://toonz.ca/bose/wiki/images/a/a3/Compact_Channel_2_Line_Level.png" width="475" height="412" /></p>
-</html>
-----
-[[Category:ToneMatch]]
-[[Category:Settings]]
-[[Category:Guitar]]
+== {{Compact}} ==
+Connect your guitar directly to the {{Compact}} channel 2. Set the ToneMatch switch to Line Level (down position). This will give you the flattest response.
+[[File:Compact_Channel_2_Line_Level.png]]
+If you find the tone is too bassy, set the ToneMatch switch to Guitar (up position)
+== {{S1}} ==
+You may be closer to the {{S1}} than the other models above. Try all three ToneMatch Presets.
+* Off - is flat
+* Guitar - rolls of some bass
+* Mic - more emphasis on vocal frequencies and low end roll off
+[[File:S1_Pro_ToneMatch_Switch.jpg]]
-</html>
+----
+[[Category:ToneMatch]]
+[[Category:Settings]]
+[[Category:Guitar]]
+[[Category:S1]]
+[[Category:L1]]
+[[Category:Compact]]