R1 Remote: Difference between revisions
mNo edit summary |
mNo edit summary |
||
| Line 39: | Line 39: | ||
If the LED is '''red most of the time''' the signal is '''too high''' and '''this is what you do'''. | If the LED is '''red most of the time''' the signal is '''too high''' and '''this is what you do'''. | ||
1) Check the LED on the PS1 power stand for that channel. If it is red most of the time, turn down the Trim Control for that channel on the PS1 until the LED is only flickering red. | :1) Check the LED on the PS1 power stand for that channel. If it is red most of the time, turn down the Trim Control for that channel on the PS1 until the LED is only flickering red. | ||
2) Check the LED on the remote. If it is still red most of the time, turn the Channel Volume Control for that channel down on the R1 remote until LED is only flickering red. | :2) Check the LED on the remote. If it is still red most of the time, turn the Channel Volume Control for that channel down on the R1 remote until LED is only flickering red. | ||
After completing this procedure you may be able to get more overall volume by turning up the Master Volume Control on the R1. | After completing this procedure you may be able to get more overall volume by turning up the Master Volume Control on the R1. | ||