R1 Remote: Difference between revisions
No edit summary |
No edit summary |
||
| Line 23: | Line 23: | ||
If the knobs get stiff, you can pull them out a bit. Chances are they've just gotten jammed down during packing. | If the knobs get stiff, you can pull them out a bit. Chances are they've just gotten jammed down during packing. | ||
== What do the LEDs | == What do the LEDs mean? == | ||
There are two LEDs on the R1, one for Channel 1 and one for Channel 2. | There are two LEDs on the R1, one for Channel 1 and one for Channel 2. | ||
The LEDs indicate the amount of level in Channel 1 and 2. They are INDEPENDENT of the setting of the Master Volume control a the bottom of the R1. | The LEDs indicate the amount of level in Channel 1 and 2. (For experts, they are driven by the level at the A/D for the channel. | ||
They are INDEPENDENT of the setting of the Master Volume control a the bottom of the R1. | |||
The LEDs turn from off to green when there's more than a little bit of signal in the channel. | The LEDs turn from off to green when there's more than a little bit of signal in the channel. | ||