Template:T8S Pan Aux: Difference between revisions

@@ Line 7: / Line 7: @@
 ;Setting up monitors example
-*Connect your monitors to the T8S Aux Outputs. On the T8S you have four Aux Outputs. You can direct any channel to one of the Aux Outputs to create a monitor mix
-*As you assign a channel to an Aux Output, you can set the level and make the Aux send from the channel:
+Connect your monitors to the T8S Aux Outputs. On the T8S you have four Aux Outputs. You can direct any channel to one of the Aux Outputs to create a monitor mix. As you assign a channel to an Aux Output, you can set the level and make the Aux send from the channel:
-**    Dry (direct from the Preamp with no processing)
-**    Pre (volume is NOT controlled by the channel volume)
+;Dry &#58; After Preamp
-**    Post (volume is controlled by the channel volume)
+:The only control that has an effect on the signal is the channel trim.
+;Pre &#58; With EQ and FX
+:All settings for Preset, zEQ, ParaEQ, effects are sent through to the Aux output. The volume is controlled by the Level setting in this menu. Volume is not affected by the channel volume control. Reverb available for Aux 1 output only.
+;Post &#58; After Fader
+:The volume is controlled by the channel volume control.