F1 Model 812 Flexible Array Loudspeaker: Difference between revisions

Line 1:

__NOEDITSECTION__

<html>

Line 225:

{{#Click:http://toonz.ca/bose/wiki/images/e/ef/F1_Model_812_Rear_IO.jpg | Image: F1 Model 812 Rear IO.jpg | 600px | F1 IO Panel}}

==== Volume Controls and Signal / Clip lights ====

When setting the Volume Control on the F1 Model 812 you can turn up the Volume Control until you see solid red, and then turn it down a little. Occasional red flickers (up to a second long) are okay. This may start to happen at -5 dB before clipping or with transient peaks. You will see these to warn you when you are approaching clipping. If you see solid red then you may be clipping.

You won't damage the system if the red lights are visible. The internal limiter will protect the system. You can tell when the limiter is working. The yellow limiter light will come on.

==== Input 1 ====

Line 231:

Line 236:

[[Image:F1 Input Panel Signal Input.png]]

==== Input 2 Volume Control / Mute ====

Turning the Volume Controls all the way down sets the input to its lowest level but a strong signal may still be audible. This does not indicate a malfunction.

@@ Line 1: / Line 1: @@
-__NOEDITSECTION__
+<!-- __NOEDITSECTION__  -->
 <html>
 <script src="http://toonz.ca/js/lightbox/js/jquery-1.11.0.min.js"></script>
@@ Line 225: / Line 225: @@
 {{#Click:http://toonz.ca/bose/wiki/images/e/ef/F1_Model_812_Rear_IO.jpg | Image: F1 Model 812 Rear IO.jpg | 600px | F1 IO Panel}}
+==== Volume Controls and Signal / Clip lights  ====
+When setting the Volume Control on the F1 Model 812 you can turn up the Volume Control until you see solid red, and then turn it down a little. Occasional red flickers (up to a second long) are okay. This may start to happen at -5 dB before clipping or with transient peaks. You will see these to warn you when you are approaching clipping. If you see solid red then you may be clipping.
+You won't damage the system if the red lights are visible. The internal limiter will protect the system. You can tell when the limiter is working. The yellow limiter light will come on.
 ==== Input 1 ====
@@ Line 231: / Line 236: @@
 [[Image:F1 Input Panel Signal Input.png]]
+==== Input 2 Volume Control / Mute ====
+Turning the Volume Controls all the way down sets the input to its lowest level but a strong signal may still be audible. This does not indicate a malfunction.