Stereo Mixer to Mono L1®: Difference between revisions

@@ Line 64: / Line 64: @@
 </html>
+=== L1® Inputs ===
 ;Model 1S Analog Input
@@ Line 80: / Line 80: @@
 ;Compact Channel 2
-{{#Click:L1®_Compact#Channel_2|Image:Compact Channel 2 Balanced.png|Model II Analog Input}}
+{{#Click:L1®_Compact#Channel_2|Image:Compact Channel 2 Line Level2.png|Model II Analog Input}}
+Start with the Input Trim set straight up and adjust so that you get a solid green signal. If you see red, turn the trim down.
-Start with the Input Trim set to '''3''' and adjust so that you get a solid green signal. If you see red, turn the trim down.
+== General Principles==
-It's pretty easy to make this work. You can pan all your inputs hard LEFT and take the LEFT output and connect that to your {{L1}}. If you have a stereo source and two stereo channels, then you can
+It's easy to make this work. You can pan all your inputs hard LEFT and take the LEFT output and connect that to your {{L1}}. If you have a stereo source and two stereo channels, then you can
 #Run the left side of the stereo source to the left input on one stereo channel,