T1 ToneMatch® Audio Engine / Microphone Stand Bracket: Difference between revisions

mNo edit summary
mNo edit summary
Line 21: Line 21:
*[http://bose.infopop.cc/eve/forums/a/tpc/f/7521050644/m/4291011005 Sight Lines and the T1<sup>®</sup>] - Owners talking about placement of the T1® on the stage using the Microphone Stand Bracket.
*[http://bose.infopop.cc/eve/forums/a/tpc/f/7521050644/m/4291011005 Sight Lines and the T1<sup>®</sup>] - Owners talking about placement of the T1® on the stage using the Microphone Stand Bracket.


==== Hints ====
=== Hints ===
* The bracket that sits parallel to the floor has a bevel on the top. The bevel should run down, facing you. If the bevel runs down away from you, the bracket is upside down and the {{T1 nl}} will not sit properly on top of it.
* The bracket that sits parallel to the floor has a bevel on the top. The bevel should run down, facing you. If the bevel runs down away from you, the bracket is upside down and the {{T1 nl}} will not sit properly on top of it.
* Secure the ToneMatch® cable to your microphone stand, above the {{T1 nl}}. This will help keep it secure on the bracket and help to keep it from hitting the floor if it becomes dislodged from the bracket.
* Secure the ToneMatch® cable to your microphone stand, above the {{T1 nl}}. This will help keep it secure on the bracket and help to keep it from hitting the floor if it becomes dislodged from the bracket.
* If you use a microphone stand with a wider than usual diameter, try removing the inserts in the clamp. &mdash; [http://bose.infopop.cc/eve/forums?a=tpc&f=3976055944&m=956104903&r=956104903#956104903 Source: dberch on the Forum]
* If you use a microphone stand with a wider than usual diameter, try removing the inserts in the clamp. &mdash; [http://bose.infopop.cc/eve/forums?a=tpc&f=3976055944&m=956104903&r=956104903#956104903 Source: dberch on the Forum]


==== Securing the T1® to the Bracket ====
=== Securing the T1® to the Bracket ===


{{:Securing the T1® to the Microphone Stand Bracket}}
{{:Securing the T1® to the Microphone Stand Bracket}}