L1® Compact: Difference between revisions - Bose Portable PA Knowledge

Line 225:

== Line Out ==

From the Owners Guide

[[Image:CompactLineOut.gif|right]]

=== Rear panel outputs ===

¼-inch output – Mono analog output that accepts either ¼ inch TRS balanced or

TS unbalanced cables. Can be used to link multiple L1® Compact systems together

by connecting the ¼-inch output from one L1® Compact system to the ¼-inch input

(Channel 2) on a second L1® Compact system. This will provide additional coverage

in larger spaces. You can also use the ¼-inch output to connect to a house PA

system and use the L1® Compact system as your personal monitor.

Note: Using a TS unbalanced cable will result in a drop in the audio level of -6dBu.

=== ¼ inch jack output EQ ===

The Compact has a balanced line-out that is a mix of all the inputs, post level and EQ settings on the input panel. The signal at the line out will be full range down to 30 Hz. There is an exception. The Channel 2 input will be band-pass above 60 Hz (nothing below that) when the ToneMatch® switch is ON (up position). The other inputs are unaffected.

Line 236:

Line 249:

:[http://bose.infopop.cc/eve/forums/a/tpc/f/7521050644/m/787106852?r=514100362#514100362 Source: Neil-at-Bose]

== Physical Comparison to other L1® Products ==

@@ Line 225: / Line 225: @@
 == Line Out ==
+From the Owners Guide
+[[Image:CompactLineOut.gif|right]]
+=== Rear panel outputs ===
+¼-inch output – Mono analog output that accepts either ¼ inch TRS balanced or
+TS unbalanced cables. Can be used to link multiple L1® Compact systems together
+by connecting the ¼-inch output from one L1® Compact system to the ¼-inch input
+(Channel 2) on a second L1® Compact system. This will provide additional coverage
+in larger spaces. You can also use the ¼-inch output to connect to a house PA
+system and use the L1® Compact system as your personal monitor.
+Note: Using a TS unbalanced cable will result in a drop in the audio level of -6dBu.
+=== &frac14; inch jack output EQ ===
 The Compact has a balanced line-out that is a mix of all the inputs, post level and EQ settings on the input panel. The signal at the line out will be full range down to 30 Hz. There is an exception. The Channel 2 input will be band-pass above 60 Hz (nothing below that) when the ToneMatch® switch is ON (up position). The other inputs are unaffected.
@@ Line 236: / Line 249: @@
 :[http://bose.infopop.cc/eve/forums/a/tpc/f/7521050644/m/787106852?r=514100362#514100362 Source: Neil-at-Bose]
 == Physical Comparison to other L1® Products ==