DJ: Difference between revisions - Bose Portable PA Knowledge

Line 66:

== Mixers ==

General Guidelines

=== Model I and Classic ===

===== XLR to XLR =====

The XLR inputs for Channels 1 and 2 are intended for microphone level inputs.

*If your source (mixer or CD/DVD player) has XLR outputs, check to see if you have the option to set it to a microphone level output. If so, use that setting.

*If your source has XLR outputs at line-level (most likely) then you will probably need a [[Pad]] between the source and the [[Model I nl]] (or [[Classic nl]]) Power Stand.

*You may be able to make things work without the [[Pad]] by turning down the output from the source and turning down the trim at the Power Stand. If it sounds okay then you are probably fine. If you cannot get enough a good sounding signal without an excess of noise then try a [[Pad]].

===== ~~¼~~ inch jack inch to ~~¼~~ inch =====

===== ¼ inch jack inch to ¼ inch =====

If your mixer has ¼ inch jack outputs, these are almost certainly at line-level and should work well with any of the ¼ inch jack inputs (Channels 1, 2, 3, 4) on a {{Model I nl}} or {{Classic nl}}.

~~There~~ are ~~several articles related to using specific mixers~~ with the [[Model I ~~nl]] and [[~~Classic ~~nl]]~~.~~  Here is a list of what is available: [[Mixer|Mixers and connection recommendations]] ~~

If your mixer has ¼ inch jack outputs, these are almost certainly at line-level and should work well with any of the ¼ inch jack inputs (Channels 1, 2, 3, 4) on a {{Model I}} or {{Classic}}.

=== {{Model II}} ===

=== {{T1}} ===

You can probably run XLR or ¼ inch jack line level inputs to the T1® Channels 1,2,3. If you have the option to run ¼ inch to ¼ inch, you could use T1® Channels 4/5.

=== Specific Mixers ===

There are several articles related to using specific mixers with the {{Model I}} and {{Classic}}.  Here is a list of what is available: [[Mixer|Mixers and connection recommendations]]

----

[[Category:DJ]] [[Category:Application_Note]]

~~ ~~

@@ Line 66: / Line 66: @@
 <br>
-== Mixers ==
+== Mixers  ==
+General Guidelines
-=== Model I and Classic ===
+=== Model I and Classic  ===
-===== XLR to XLR =====
+===== XLR to XLR  =====
 The XLR inputs for Channels 1 and 2 are intended for microphone level inputs. <br>
 *If your source (mixer or CD/DVD player) has XLR outputs, check to see if you have the option to set it to a microphone level output. If so, use that setting.<br>
 *If your source has XLR outputs at line-level (most likely) then you will probably need a [[Pad]] between the source and the [[Model I nl]] (or [[Classic nl]]) Power Stand. <br>
 *You may be able to make things work without the [[Pad]] by turning down the output from the source and turning down the trim at the Power Stand. If it sounds okay then you are probably fine. If you cannot get enough a good sounding signal without an excess of noise then try a [[Pad]].
-===== &frac14; inch jack inch to &frac14; inch =====
+===== ¼ inch jack inch to ¼ inch  =====
-If your mixer has &frac14; inch jack outputs, these are almost certainly at line-level and should work well with any of the &frac14; inch jack inputs (Channels 1, 2, 3, 4) on a {{Model I nl}} or {{Classic nl}}.
-There are several articles related to using specific mixers with the [[Model I nl]] and [[Classic nl]].&nbsp; Here is a list of what is available: [[Mixer|Mixers and connection recommendations]]<br> <br>
+If your mixer has ¼ inch jack outputs, these are almost certainly at line-level and should work well with any of the ¼ inch jack inputs (Channels 1, 2, 3, 4) on a {{Model I}} or {{Classic}}.
+=== {{Model II}} ===
+{{#lst:L1® Model II|Stereo Source to Power Stand Analog Input}}
+=== {{T1}} ===
+You can probably run XLR or &frac14; inch jack line level inputs to the T1® Channels 1,2,3.  If you have the option to run &frac14; inch to &frac14; inch, you could use T1® Channels 4/5.
 <br>
+=== Specific Mixers ===
+There are several articles related to using specific mixers with the {{Model I}} and {{Classic}}.&nbsp; Here is a list of what is available: [[Mixer|Mixers and connection recommendations]]<br> <br>
 ----
+<br>
 [[Category:DJ]] [[Category:Application_Note]]
-<br>