Zoom H4 and T1® Usage: Difference between revisions

Line 78:

==Recording Results==

With the Zoom H4 connected and used as a recorder in this configuration you can expect to get exactly what you would hear from the T1 AUX OUT connector. Provided you have enabled the AUX output on each T1 channel, you’ll hear what is plugged into the input of that channel, whether it’s a microphone, iPod, guitar, etc. To enable the AUX OUTput on each channel you want to record, [[~~follow~~ this ~~link to setting AUX OUT per channel on your T1.~~]]

With the Zoom H4 connected and used as a recorder in this configuration you can expect to get exactly what you would hear from the T1 AUX OUT connector. Provided you have enabled the AUX output on each T1 channel, you’ll hear what is plugged into the input of that channel, whether it’s a microphone, iPod, guitar, etc. To enable the AUX OUTput on each channel you want to record, [[Media:take a brief look at this video]].

The “mix” of all your T1 channels will be present at the T1 AUX OUT connector. Therefore, you need to ensure your channel “mix” on the T1 is the way you want to record all the channels coming from the T1. To establish your T1 AUX OUT “mix”, [[follow this link to setting the AUX OUT levels.]] If you have a “Hot” channel, but don’t really realize it when listening to the L1’s output, you’ll have a “Hot” channel on your recording. A way to determine this is to plug in a set of headphones to the AUX OUT connector and listen during sound check. Be careful of the headphone volume. Don’t blow your ears out!

@@ Line 78: / Line 78: @@
 ==Recording Results==
-With the Zoom H4 connected and used as a recorder in this configuration you can expect to get exactly what you would hear from the T1 AUX OUT connector.  Provided you have enabled the AUX output on each T1 channel, you’ll hear what is plugged into the input of that channel, whether it’s a microphone, iPod, guitar, etc.  To enable the AUX OUTput on each channel you want to record, [[follow this link to setting AUX OUT per channel on your T1.]]
+With the Zoom H4 connected and used as a recorder in this configuration you can expect to get exactly what you would hear from the T1 AUX OUT connector.  Provided you have enabled the AUX output on each T1 channel, you’ll hear what is plugged into the input of that channel, whether it’s a microphone, iPod, guitar, etc.  To enable the AUX OUTput on each channel you want to record, [[Media:take a brief look at this video]].
 The “mix” of all your T1 channels will be present at the T1 AUX OUT connector.  Therefore, you need to ensure your channel “mix” on the T1 is the way you want to record all the channels coming from the T1.  To establish your T1 AUX OUT “mix”, [[follow this link to setting the AUX OUT levels.]]  If you have a “Hot” channel, but don’t really realize it when listening to the L1’s output, you’ll have a “Hot” channel on your recording.  A way to determine this is to plug in a set of headphones to the AUX OUT connector and listen during sound check.  Be careful of the headphone volume.  Don’t blow your ears out!