Using a Different Sub: Difference between revisions
m spelling |
applicabilility of Model II |
||
| Line 1: | Line 1: | ||
Using a Different Sub | '''Using a Different Sub''' | ||
{{Classic icon}} {{Model I icon}} | |||
The following notes are compiled from a discussion on the Bose Community Message Boards. | The following notes are compiled from a discussion on the Bose Community Message Boards. | ||
[http://bose.infopop.cc/eve/forums/a/tpc/f/3976055944/m/6401018152?r=2741042352#2741042352 Using a Different Sub] | [http://bose.infopop.cc/eve/forums/a/tpc/f/3976055944/m/6401018152?r=2741042352#2741042352 Using a Different Sub] | ||
These predate the {{Model II}} but are largely applicable. Note: The crossover point for the Model II is 200 Hz rather than 180 Hz documented below for the {{Classic}} and {{Model I}}. | |||
Question | |||
'''Question''' | |||
:What are the problems or benefits of pluging in a different sub cabinet to the PAS. It it even possible or feasible. Say you have a 4 ohm 250 watt EV sub with a 15 inch speaker and you plugged into it instead of the B1. What could you expect and is there any possible damage you could cause. | :What are the problems or benefits of pluging in a different sub cabinet to the PAS. It it even possible or feasible. Say you have a 4 ohm 250 watt EV sub with a 15 inch speaker and you plugged into it instead of the B1. What could you expect and is there any possible damage you could cause. | ||