T1 ToneMatch® Audio Engine / Aux: Difference between revisions

@@ Line 1: / Line 1: @@
 == Aux Output ==
-The output of any of the Channels 1, 2, 3, 4/5 can be sent to the Aux out. Options:
+The output of any of the Channels 1, 2, 3, 4/5 can be sent to the Aux out. Tap points where you can set the output to the Aux. (from page 34 of the {{T1 Manual}}
-* With or without ToneMatch™ Presets
-* With or without Effects (except Reverb)
+* Dry: After Preamp: The completely dry (no processing) signal is routed directly from the preamp stage.
-* Pre / Post the individual Channel volume controls.
+* Pre: With EQ & FX: The signal is routed from the preamp stage with applied processing.
+* Post: After Fader: The signal is routed after the Channel volume control with applied processing.
 === No Reverb on Aux ===
@@ Line 15: / Line 17: @@
 The discussion continues in the [http://bose.infopop.cc/eve/forums/a/tpc/f/7521050644/m/4091082864?r=8551095774#8551095774 Message Board]
-==== Reference from the Manual ====
+Reference: page 52 of the {{T1 Manual}}
-On page 52 of the T1 manual it says.
 Problem: Aux output does not sound right.