R1 Remote: Difference between revisions - Bose Portable PA Knowledge

Line 18:

<!--

If you power up the System without the Remote Connected, the ~~PowerStand~~ operates as though the Remote is connected with all controls straight-up (12 o'clock) position.

If you power up the System without the Remote Connected, the Power Stand operates as though the Remote is connected with all controls straight-up (12 o'clock) position.

The PS1 ~~power stand~~ continuously senses activity at all preset selectors and what is connected at the input/output jacks. In general, it is not recommended to operate without the remote connected. The PS1 power stand can however function without the R1 remote control. If you power the PS1 power stand on without the R1 remote control connected, it will operate as if the R1 remote control was connected and at a fixed setting of 12 o'clock (center position) on all the control knobs. Alternatively, if the unit is powered on with the R1 remote control first connected and the user then disconnects the R1 remote control, it will retain the last settings of the R1 remote control before you disconnected it. This is helpful in the case where sharing may be necessary.

The PS1 Power Stand continuously senses activity at all preset selectors and what is connected at the input/output jacks. In general, it is not recommended to operate without the remote connected. The PS1 power stand can however function without the R1 remote control. If you power the PS1 power stand on without the R1 remote control connected, it will operate as if the R1 remote control was connected and at a fixed setting of 12 o'clock (center position) on all the control knobs. Alternatively, if the unit is powered on with the R1 remote control first connected and the user then disconnects the R1 remote control, it will retain the last settings of the R1 remote control before you disconnected it. This is helpful in the case where sharing may be necessary.

Even without the R1 Remote control the system can get to full output if the input trims are carefully set.

Line 68:

[http://bose.infopop.cc/eve/forums/a/tpc/f/3976055944/m/7891042462/r/3151052462#3151052462 Daisy Chain Remotes?]

=== One R1 Remote for Two PS1 ~~Powerstands~~ ===

=== One R1 Remote for Two PS1 Power Stands ===

There are two connections on the {{R1}}. Can I connect two {{PS1}}s and control them simultaneously?

Line 81:

=== Vocals on the Left ===

I always wire up the ~~PowerStand~~ so that the vocals are in Channel 1. This just means that it's always the same, easy to describe, and one less thing to wonder about. (exception below)

I always wire up the Power Stand so that the vocals are in Channel 1. This just means that it's always the same, easy to describe, and one less thing to wonder about. (exception below)

Line 111:

Again, most people never notice these issues in the first place and if they do, it's rarely a problem of any sort.

See more about [[Latency and The L1®]]

== Hilmar-at-Bose Talks about the R1 Remote settings ==

@@ Line 18: / Line 18: @@
 {{:R1 Remote Recommended}}
 <!--
-If you power up the System without the Remote Connected, the PowerStand operates as though the Remote is connected with all controls straight-up (12 o'clock) position.
+If you power up the System without the Remote Connected, the Power Stand operates as though the Remote is connected with all controls straight-up (12 o'clock) position.
-The PS1 power stand continuously senses activity at all preset selectors and what is connected at the input/output jacks. In general, it is not recommended to operate without the remote connected. The PS1 power stand can however function without the R1 remote control. If you power the PS1 power stand on without the R1 remote control connected, it will operate as if the R1 remote control was connected and at a fixed setting of 12 o'clock (center position) on all the control knobs. Alternatively, if the unit is powered on with the R1 remote control first connected and the user then disconnects the R1 remote control, it will retain the last settings of the R1 remote control before you disconnected it. This is helpful in the case where sharing may be necessary.
+The PS1 Power Stand continuously senses activity at all preset selectors and what is connected at the input/output jacks. In general, it is not recommended to operate without the remote connected. The PS1 power stand can however function without the R1 remote control. If you power the PS1 power stand on without the R1 remote control connected, it will operate as if the R1 remote control was connected and at a fixed setting of 12 o'clock (center position) on all the control knobs. Alternatively, if the unit is powered on with the R1 remote control first connected and the user then disconnects the R1 remote control, it will retain the last settings of the R1 remote control before you disconnected it. This is helpful in the case where sharing may be necessary.
 Even without the R1 Remote control the system can get to full output if the input trims are carefully set.
@@ Line 68: / Line 68: @@
 [http://bose.infopop.cc/eve/forums/a/tpc/f/3976055944/m/7891042462/r/3151052462#3151052462 Daisy Chain Remotes?]
-=== One R1 Remote for Two PS1 Powerstands ===
+=== One R1 Remote for Two PS1 Power Stands ===
 There are two connections on the {{R1}}. Can I connect two {{PS1}}s and control them simultaneously?
@@ Line 81: / Line 81: @@
 === Vocals on the Left ===
-I always wire up the PowerStand so that the vocals are in Channel 1. This just means that it's always the same, easy to describe, and one less thing to wonder about. (exception below)
+I always wire up the Power Stand so that the vocals are in Channel 1. This just means that it's always the same, easy to describe, and one less thing to wonder about. (exception below)
@@ Line 111: / Line 111: @@
 Again, most people never notice these issues in the first place and if they do, it's rarely a problem of any sort.
+See more about [[Latency and The L1®]]
 == Hilmar-at-Bose Talks about the R1 Remote settings ==