PS1 Powerstand / Daisy Chain: Difference between revisions

Line 1:

On the relatively rare occasion where you might need to connect the output from one {{PS1}} to another {{PS1}}:

=== Two {{PS1}}s for one Vocal ===

You can

* Run your ~~mic~~ into the first L1™ PS1 Powerstand (let's say - Channel 1).

* Run your microphone into the first L1™ PS1 Powerstand (let's say - Channel 1).

* In Channel 1 insert an XLR cable from the Channel 1 Line Out

* At the other end of the cable connect a [[Pad]]. The people-at-Bose usually recommend a -20 dBu pad. Some owners have reported success with a -10 dBu pad.

Line 15:

Arrows indicate the direction the signal is flowing.

* Position the two {{L1}}s '''at least 20 feet apart''' to avoid the possibility of odd phase effects in the audience. More detail: [[Phase Cancellation]]

* Position the two {{L1}}s '''at least 20 feet apart''' if possible to avoid the possibility of odd phase effects in the audience. More detail: [[Phase Cancellation]]

* [[PS1 Powerstand Connections/Interactive|Close up view of the Input Panel]]

=== Two {{PS1}}s for Mono Tracks (or one side of stereo pair) ===

In this example, we are using Channel 2 so that you leave Channel 1 available for another input like a vocal.

You can

* Run your input into the first L1™ PS1 Powerstand (let's say - Channel 2).

* In Channel 2 insert an XLR cable from the Channel 2 Line Out

* At the other end of the cable connect a [[Pad]]. The people-at-Bose usually recommend a -20 dBu pad. Some owners have reported success with a -10 dBu pad.

* Connect the [[Pad]] to the second {{PS1}} Channel 2.

* On the first {{PS1}}, set the input trim appropriately.

* Choose the best preset for your microphone.

* On the second {{PS1}}, the input trim should be similar to what you set on the first one, but check the trim o/l light for a solid green light (occasional red flickers are okay).

* On the second {{PS1}}, use the same preset as you used for the first one.

* For prerecored music or tracks or keyboards you want {{B1}}s as close together as possible, and the L1™s close together -or- at least 20 feet apart.

[[Image:DaisyChainTracksOn2.png]]

* [[PS1 Powerstand Connections/Interactive|Close up view of the Input Panel]]

----

@@ Line 1: / Line 1: @@
 On the relatively rare occasion where you might need to connect the output from one {{PS1}} to another {{PS1}}:
+=== Two {{PS1}}s for one Vocal ===
 You can
-* Run your mic into the first L1™ PS1 Powerstand (let's say - Channel 1).
+* Run your microphone into the first L1™ PS1 Powerstand (let's say - Channel 1).
 * In Channel 1 insert an XLR cable from the Channel 1 Line Out
 * At the other end of the cable connect a [[Pad]]. The people-at-Bose usually recommend a -20 dBu pad. Some owners have reported success with a -10 dBu pad.
@@ Line 15: / Line 15: @@
 Arrows indicate the direction the signal is flowing.
-* Position the two {{L1}}s '''at least 20 feet apart''' to avoid the possibility of odd phase effects in the audience. More detail: [[Phase Cancellation]]
+* Position the two {{L1}}s '''at least 20 feet apart''' if possible to avoid the possibility of odd phase effects in the audience. More detail: [[Phase Cancellation]]
 * [[PS1 Powerstand Connections/Interactive|Close up view of the Input Panel]]
+=== Two {{PS1}}s for Mono Tracks (or one side of stereo pair) ===
+In this example, we are using Channel 2 so that you leave Channel 1 available for another input like a vocal.
+You can
+* Run your input into the first L1™ PS1 Powerstand (let's say - Channel 2).
+* In Channel 2 insert an XLR cable from the Channel 2 Line Out
+* At the other end of the cable connect a [[Pad]]. The people-at-Bose usually recommend a -20 dBu pad. Some owners have reported success with a -10 dBu pad.
+* Connect the [[Pad]] to the second {{PS1}} Channel 2.
+* On the first {{PS1}}, set the input trim appropriately.
+* Choose the best preset for your  microphone.
+* On the second {{PS1}}, the input trim should be similar to what you set on the first one, but check the trim o/l light for a solid green light (occasional red flickers are okay).
+* On the second {{PS1}}, use the same preset as  you used for the first one.
+* For prerecored music or tracks or keyboards you want {{B1}}s as close together as possible, and the L1&trade;s close together -or- at least 20 feet apart.
+[[Image:DaisyChainTracksOn2.png]]
+* [[PS1 Powerstand Connections/Interactive|Close up view of the Input Panel]]
 ----
 <references/>