Mixer / Yamaha / MX12/4: Difference between revisions

image links and detail in the final links section.
No edit summary
Line 32: Line 32:
for PS1 Powerstand Channel 1 or 2 inputs
for PS1 Powerstand Channel 1 or 2 inputs


The ¼ inch Console should work fine directly into the {{PS1}} Channels 1/2/3/4. Note: this output is [[TRS|Tip-Ring-Sleeve]] (stereo output) so you will need a Tip-Ring-Sleeve to two Tip-Sleeve patch cord to maintain the  separation of the left and right channels.
The &frac14; inch Console should work fine directly into the {{PS1}} Channels 1/2/3/4. Note: this output is [[TRS|Tip-Ring-Sleeve]] (stereo output) so you will need a Tip-Ring-Sleeve to two Tip-Sleeve patch cord to maintain the  separation of the left and right channels. <br />[[Image:InsertCable.gif]]


This Mixer also has Four group outputs (busses).  
This Mixer also has Four group outputs (busses). Note that the 'sends' are pre-fader.
 
* Page 6 in the Manual showing outputs. #6 highlighted are the &frac14; inch group outputs. <br />[[Image:YamahaMX124Out2.gif]]


{{RunTROrTRSUnbalanced}}
{{RunTROrTRSUnbalanced}}
Line 42: Line 44:
* [http://www2.yamaha.co.jp/manual/pdf/pa/english/mixers/MX12_4E.pdf Yamaha MX12/4 Manual]
* [http://www2.yamaha.co.jp/manual/pdf/pa/english/mixers/MX12_4E.pdf Yamaha MX12/4 Manual]
* Page 6 in the Manual showing outputs. #7 highlighted is the Stereo Console out. <br />[[Image:YamahaMX124Out1.gif]]
* Page 6 in the Manual showing outputs. #7 highlighted is the Stereo Console out. <br />[[Image:YamahaMX124Out1.gif]]
* Page 6 in the Manual showing outputs. #6 highlighted are the &frac14; inch group outputs. <br />[[Image:YamahaMX124Out2.gif]]
 
* Page 6 in the Manual showing outputs. #5 highlighted are the [[XLR]] balanced outputs. These output +4 dBU nominal and are likely too hot for direct input to the XLR inputs on the {{PS1}}. Use [[Pad]]s.<br />[[Image:YamahaMX124Out3.gif]]
* Page 6 in the Manual showing outputs. #5 highlighted are the [[XLR]] balanced outputs. These output +4 dBU nominal and are likely too hot for direct input to the XLR inputs on the {{PS1}}. Use [[Pad]]s.<br />[[Image:YamahaMX124Out3.gif]]