PS1 Powerstand / Daisy Chain: Difference between revisions
mNo edit summary |
No edit summary |
||
| Line 4: | Line 4: | ||
* Run your mic into the first L1™ PS1 Powerstand (let's say - Channel 1). | * Run your mic into the first L1™ PS1 Powerstand (let's say - Channel 1). | ||
* In Channel 1 insert an XLR cable from the Channel 1 Line Out | * In Channel 1 insert an XLR cable from the Channel 1 Line Out | ||
* At the other end of the cable connect a [[Pad]]. The people-at-Bose usually recommend a -20 dBu pad | * At the other end of the cable connect a [[Pad]]. The people-at-Bose usually recommend a -20 dBu pad. Some owners have reported success with a -10 dBu pad. | ||
* Connect the [[Pad]] to the second {{PS1}} Channel 1 or 2. | * Connect the [[Pad]] to the second {{PS1}} Channel 1 or 2. | ||
* On the first {{PS1}}, set the input trim appropriately. | * On the first {{PS1}}, set the input trim appropriately. | ||