PS1 Powerstand Connections/Line Out/Insert: Difference between revisions
first ed |
|||
| Line 4: | Line 4: | ||
* post {{R1}} Channel Level | * post {{R1}} Channel Level | ||
For Channels One or Two insert a 1/4 inch cable halfway into the Insert jack to get a signal that is controlled by the volume control on the Remote. This is also known as the [[Half Insert]] method. For more information about 1/4 cables see [[TRS|Tip Ring Sleeve connections]]. | For Channels One or Two insert a 1/4 inch cable halfway into the Insert jack to get a signal that is controlled by the volume control on the Remote. This is also known as the [[Half Insert]] method. For more information about 1/4 cables see [[TRS|Tip Ring Sleeve connections]]. The rectangular box shown below the input panel is a [[DI]], used to output the signal to a console or house system. | ||
[[Image:PS1LineOutInsert.jpg]] | [[Image:PS1LineOutInsert.jpg]] | ||