Template:Sub2 with Sub1: Difference between revisions

Line 4:

;Option 1: Same EQ to both Sub1 and Sub2 (37 Hz to 200 Hz)

* Connect the L1 Pro32 to the Sub2 (use the supplied SubMatch cable)

# Connect the L1 Pro32 to the Sub2 (use the supplied SubMatch cable)

* Connect the Sub2 to the Sub1 use a SubMatch cable (purchased separately) OR

# Connect the Sub2 to the Sub1 use a SubMatch cable (purchased separately) OR

** Connect the Sub2 Line Out to the Sub1 with an XLR cable and power the Sub1 with the supplied IEC power cable.

#* Connect the Sub2 Line Out to the Sub1 with an XLR cable and power the Sub1 with the supplied IEC power cable.

** On the Sub2 set the Line Out EQ to Full (Full Range)

#* On the Sub2 set the Line Out EQ to Full (Full Range)

* Level - set to 12:00 o'clock on both. If adjustments are necessary - keep the Level Control the same on both Subs

# Level - set to 12:00 o'clock on both. If adjustments are necessary - keep the Level Control the same on both Subs

* Polarity: Plus on both

# Polarity: Plus on both

; Option 2: 37 Hz to 100 Hz to Sub2, 100 Hz to 200 Hz to Sub1

* Connect the L1 Pro32 to the Sub2 (use the SubMatch cable)

# Connect the L1 Pro32 to the Sub2 (use the SubMatch cable)

* On the Sub2 set the Line Out EQ to HPF (High Pass Filter)

# On the Sub2 set the Line Out EQ to HPF (High Pass Filter)

* Connect the Sub2 Line Out to the Sub1 with an XLR cable and power the Sub1 with the supplied IEC power cable.

# Connect the Sub2 Line Out to the Sub1 with an XLR cable and power the Sub1 with the supplied IEC power cable.

* Level - set to 12:00 o'clock on both. If adjustments are necessary - keep the Level Control the same on both Subs

# Level - set to 12:00 o'clock on both. If adjustments are necessary - keep the Level Control the same on both Subs

* Polarity: Plus on both

# Polarity: Plus on both

<!--

For more information start at 1:23 in the video below.<br>

@@ Line 4: / Line 4: @@
 ;Option 1: Same EQ to both Sub1 and Sub2 (37 Hz to 200 Hz)
-* Connect the L1 Pro32 to the Sub2 (use the supplied SubMatch cable)
+# Connect the L1 Pro32 to the Sub2 (use the supplied SubMatch cable)
-* Connect the Sub2 to the Sub1 use a SubMatch cable (purchased separately) OR
+# Connect the Sub2 to the Sub1 use a SubMatch cable (purchased separately) OR
-** Connect the Sub2 Line Out to the Sub1 with an XLR cable and power the Sub1 with the supplied IEC power cable.
+#* Connect the Sub2 Line Out to the Sub1 with an XLR cable and power the Sub1 with the supplied IEC power cable.
-** On the Sub2 set the Line Out EQ to Full (Full Range)
+#* On the Sub2 set the Line Out EQ to Full (Full Range)
-* Level - set to 12:00 o'clock on both. If adjustments are necessary - keep the Level Control the same on both Subs
+# Level - set to 12:00 o'clock on both. If adjustments are necessary - keep the Level Control the same on both Subs
-* Polarity: Plus on both
+# Polarity: Plus on both
 ; Option 2: 37 Hz to 100 Hz to Sub2, 100 Hz to 200 Hz to Sub1
-* Connect the L1 Pro32 to the Sub2 (use the SubMatch cable)
+# Connect the L1 Pro32 to the Sub2 (use the SubMatch cable)
-* On the Sub2 set the Line Out EQ to HPF (High Pass Filter)
+# On the Sub2 set the Line Out EQ to HPF (High Pass Filter)
-* Connect the Sub2 Line Out to the Sub1 with an XLR cable and power the Sub1 with the supplied IEC power cable.
+# Connect the Sub2 Line Out to the Sub1 with an XLR cable and power the Sub1 with the supplied IEC power cable.
-* Level - set to 12:00 o'clock on both. If adjustments are necessary - keep the Level Control the same on both Subs
+# Level - set to 12:00 o'clock on both. If adjustments are necessary - keep the Level Control the same on both Subs
-* Polarity: Plus on both
+# Polarity: Plus on both
 <!--
 For more information start at 1:23 in the video below.<br>