L1 Inputs General Information: Difference between revisions
| Line 13: | Line 13: | ||
* On the T8S the Aux inputs are 9/10 | * On the T8S the Aux inputs are 9/10 | ||
These are balanced line-level inputs. Use balanced connections with a 1/4-inch Tip-Ring-Sleeve plug. Using a 1/4 inch (6.3mm) Tip-Sleeve plug creates an unbalanced connection and loses up to -6 dB gain. | These are balanced line-level inputs. Use balanced connections with a 1/4-inch Tip-Ring-Sleeve plug. Using a 1/4 inch (6.3mm) Tip-Sleeve plug creates an unbalanced connection and loses up to -6 dB gain. | ||
== L1 Compact == | |||
=== Channel 1 (XLR) === | |||
Channel 1 is microphone-level with a built-in ToneMatch Preset for vocal microphones. Do not connect a line-level source to this input as it will be too hot. Also, you cannot disable the vocal microphone Preset, so this is not generally suitable for full-range inputs. | |||
=== Channel 2 === | |||
====1/4 inch (6.3 mm) Tip-Ring-Sleeve ==== | |||
* If you connect with a 1/4 inch (6.3mm) Tip-Sleeve input, this is an instrument-level input. If connecting a guitar, set the ToneMatch switch to Guitar (up). For other instruments, set the ToneMatch switch to Line (down). | |||
* If you connect with a 1/4 inch (6.3 mm) Tip-Ring-Sleeve jack, this is a balanced line-level input. Use balanced connections with a 1/4-inch Tip-Ring-Sleeve plug. A 1/4 inch (6.3mm) Tip-Sleeve plug creates an unbalanced connection and loses up to -6 dB gain. Set the ToneMatch switch to Line (down). | |||
==== 1/8 inch Tip-Ring-Sleeve ==== | |||
This is a stereo input for consumer line-level inputs. The left and right channels are buffered to mono. | |||
== L1 Model II/ Model 1S== | == L1 Model II/ Model 1S== | ||