L1 Inputs General Information: Difference between revisions

Line 13:

* On the T8S the Aux inputs are 9/10

These are balanced line-level inputs. Use balanced connections with a 1/4-inch Tip-Ring-Sleeve plug. Using a 1/4 inch (6.3mm) Tip-Sleeve plug creates an unbalanced connection and loses up to -6 dB gain.

== L1 Model II/ Model 1S==

=== Power Stand Analog Input ===

This is a 1/4 inch (6.3 mm) Tip-Ring-Sleeve jack.

It is a balanced line-level input. Use balanced connections with a 1/4-inch Tip-Ring-Sleeve plug. A 1/4 inch (6.3mm) Tip-Sleeve plug creates an unbalanced connection and loses up to -6 dB gain.

Adjust the input level with the Analog Input Trim control. Set the trim so the LED light is a solid green. If you see red, turn it down.

== L1 Pro ==

Line 20:

Line 28:

* When you connect a 1/4-inch (6.3mm) Tip-Sleeve connector to the 1/4-inch jacks, they are instrument-level inputs.

The L1 Pro systems are unique among all the Bose Portable PA systems because ~~there is~~ a Digital Signal Processor ~~that~~ automatically sets the input gain (like an automatic trim control).

The L1 Pro systems are unique among all the Bose Portable PA systems because a Digital Signal Processor automatically sets the input gain (like an automatic trim control).

Trim: 0 dB, 12 dB, 24 dB, 36 dB, and 45 dB analog gain steps are automatically selected and compensated by DSP

@@ Line 13: / Line 13: @@
 * On the T8S the Aux inputs are 9/10
 These are balanced line-level inputs. Use balanced connections with a 1/4-inch Tip-Ring-Sleeve plug. Using a 1/4 inch (6.3mm) Tip-Sleeve plug creates an unbalanced connection and loses up to -6 dB gain.
+== L1 Model II/ Model 1S==
+=== Power Stand Analog Input ===
+This is a 1/4 inch (6.3 mm) Tip-Ring-Sleeve jack.
+It is a balanced line-level input. Use balanced connections with a 1/4-inch Tip-Ring-Sleeve plug. A 1/4 inch (6.3mm) Tip-Sleeve plug creates an unbalanced connection and loses up to -6 dB gain.
+Adjust the input level with the Analog Input Trim control. Set the trim so the LED light is a solid green. If you see red, turn it down.
 == L1 Pro ==
@@ Line 20: / Line 28: @@
 * When you connect a 1/4-inch (6.3mm) Tip-Sleeve connector to the 1/4-inch jacks, they are instrument-level inputs.
-The L1 Pro systems are unique among all the Bose Portable PA systems because there is a Digital Signal Processor that automatically sets the input gain (like an automatic trim control).
+The L1 Pro systems are unique among all the Bose Portable PA systems because a Digital Signal Processor automatically sets the input gain (like an automatic trim control).
 Trim: 0 dB, 12 dB, 24 dB, 36 dB, and 45 dB analog gain steps are automatically selected and compensated by DSP