S1 Pro+ to L1 Pro: Difference between revisions

Line 9:

You will connect your microphone and or instruments to the S1 Pro+

|Categories =

Line 33:

Line 31:

# Turn down the volume on both S1 Pro+ systems. On S1 Pro+ 2, on input 3 (preferred), set the Bass and Treble to 12:00 o'clock. If using channels 1 or 2, set the Bass and Treble to 12:00 o'clock and set ToneMatch to Off, and Reverb all the way down.

# Connect the S1 Pro+ 1 Line Out (XLR connection) to L1 Pro Aux Input (input 3). The Aux Input is for line-level sources, and the best match for the line-level output of S1 Pro+.

[[File:S1 Pro+ ~~Daisy Connection~~.jpg|800px]]

[[File:S1 Pro+ to L1 Pro2.jpg|800px]]

~~~~

[[File:XLR Female to 14 TRS.jpg|300px]] or use an XLR cable with a converter [[File:XLR cable.jpg|300px]][[File:XLR Female to 14 TRS Adapter.jpg|200px]]

==== Levels ====

# On S1 Pro+ 1, bring up the channel volumes to the desired levels

# On S1 Pro+, bring up the channel volumes to the desired levels

# On S1 Pro~~+ 2~~, bring up channel 3 volume to suit your application. Note: This will not necessarily match the same position on the dials as S1 Pro+ 1

# On L1 Pro, bring up channel 3 volume to suit your application. Note: This will not necessarily match the same position on the dials as S1 Pro+

If you connect to channels 1 or 2 instead of 3

#* Set Bass and Treble at 12:00 o'clock (flat)

#* ~~If connecting to channels 1 or 2, set~~ Reverb off (see alternate connection below)

#* Set Reverb off (see alternate connection below)

==== Alternate Connection ====

@@ Line 9: / Line 9: @@
 You will connect your microphone and or instruments to the S1 Pro+
 |Categories =
@@ Line 33: / Line 31: @@
 # Turn down the volume on both S1 Pro+ systems. On S1 Pro+ 2, on input 3 (preferred), set the Bass and Treble to 12:00 o'clock. If using channels 1 or 2, set the Bass and Treble to 12:00 o'clock and set ToneMatch to Off, and Reverb all the way down.
 # Connect the S1 Pro+ 1 Line Out (XLR connection) to L1 Pro Aux Input (input 3). The Aux Input is for line-level sources, and the best match for the line-level output of S1 Pro+.
-<br>[[File:S1 Pro+ Daisy Connection.jpg|800px]]
+<br>[[File:S1 Pro+ to L1 Pro2.jpg|800px]]
-<!-- <br>[[File:S1 Pro+ Line Out.jpg|300px]][[File:S1 Pro+ 14Aux.jpg|300px]] -->
 <br>[[File:XLR Female to 14 TRS.jpg|300px]] or use an XLR cable with a converter<br>[[File:XLR cable.jpg|300px]][[File:XLR Female to 14 TRS Adapter.jpg|200px]]
 ==== Levels ====
-# On S1 Pro+ 1, bring up the channel volumes to the desired levels
+# On S1 Pro+, bring up the channel volumes to the desired levels
-# On S1 Pro+ 2, bring up channel 3 volume to suit your application. Note: This will not necessarily match the same position on the dials as S1 Pro+ 1
+# On L1 Pro, bring up channel 3 volume to suit your application. Note: This will not necessarily match the same position on the dials as S1 Pro+
+If you connect to channels 1 or 2 instead of 3
 #* Set Bass and Treble at 12:00 o'clock (flat)
-#* If connecting to channels 1 or 2, set Reverb off (see alternate connection below)
+#* Set Reverb off (see alternate connection below)
 ==== Alternate Connection ====