Sub1/Sub2: Difference between revisions
| Line 155: | Line 155: | ||
#* If you prefer, you can use a 1/4 inch (6.3 mm) Tip-Ring-Sleeve to XLR (T1 to Sub1/Sub2 Input 1). <br>There's no particular benefit to choosing one cable over the other. | #* If you prefer, you can use a 1/4 inch (6.3 mm) Tip-Ring-Sleeve to XLR (T1 to Sub1/Sub2 Input 1). <br>There's no particular benefit to choosing one cable over the other. | ||
#On the Sub1/Sub2 set the LPF setting to L1. | #On the Sub1/Sub2 set the LPF setting to L1. | ||
#DO NOT connect Sub1/Sub2 to the L1 Model II Bass Line Out. That output is EQd for the B2 or B1. Also, if you have a B1 or B2 connected to the Model II Power Stand and you connect something to the Bass Line Out, the system will reduce the overall bass output by -12 dB <ref> [[Bass_Line_Out# | #DO NOT connect Sub1/Sub2 to the L1 Model II Bass Line Out. That output is EQd for the B2 or B1. Also, if you have a B1 or B2 connected to the Model II Power Stand and you connect something to the Bass Line Out, the system will reduce the overall bass output by -12 dB <ref> [[Bass_Line_Out#Cable_connected_to_the_Bass_Line_Out_3|L1 Model II with cable connected to Bass Line Out]]</ref> | ||
#You can continue to use the ToneMatch cable between the T1 and L1 Model II (no need to use a ToneMatch Power Supply) | #You can continue to use the ToneMatch cable between the T1 and L1 Model II (no need to use a ToneMatch Power Supply) | ||