Sub1/Sub2: Difference between revisions
| Line 149: | Line 149: | ||
=== L1 Model II with Sub1/Sub2 === | === L1 Model II with Sub1/Sub2 === | ||
If you have a T1 ToneMatch mixer | ====If you have a T1 ToneMatch mixer==== | ||
#DO connect the T1 Main Output | #DO connect the T1 Main Output to the Sub1/Sub2 | ||
#* 1/4 inch Tip Ring Sleeve to Sub1/Sub2 Input 1. | |||
#* If you prefer, you can use a 1/4 inch (6.3 mm) Tip-Ring-Sleeve to XLR (T1 to Sub1/Sub2 Input 1). <br>There's no particular benefit to choosing one cable over the other. | |||
#On the Sub1/Sub2 set the LPF setting to L1. | #On the Sub1/Sub2 set the LPF setting to L1. | ||
#DON'T connect Sub1/Sub2 to the L1 Model II Bass Line Out. That output is EQd for the B2 or B1. | #DON'T connect Sub1/Sub2 to the L1 Model II Bass Line Out. That output is EQd for the B2 or B1. | ||
#You can continue to use the ToneMatch cable between the T1 and L1 Model II (no need to use a ToneMatch Power Supply) | |||
If you have a third-party mixer | ====If you have a third-party mixer==== | ||
#Connect a sub or aux line out to Sub1/Sub2 Input 1. | #Connect a sub or aux line out to Sub1/Sub2 Input 1. | ||
#On the Sub1/Sub2 set the LPF setting to L1. | #On the Sub1/Sub2 set the LPF setting to L1. | ||