L1® System Holistic View: Difference between revisions

Line 1:

<big>''' A Holistic View of the L1&trade '''</big><ref>[http://bose.infopop.cc/groupee/forums/a/tpc/f/867107664/m/5551058832/r/5551058832 Originally appeared in the {{forum}}]</ref>

== The {{L1}} System ==

[[Image:SpeakerPower01.gif]]

Line 12:

Line 13:

{{B1}}s

=== {{B1}}s ===

If you break the pair of ~~B1s~~ in half, and use just one of them, it draws 125 watts.<ref>one {{B1}} loudspeaker connected draws up to 125 watts at 8 ohms</ref>

If you break the pair of {{B1}}s in half, and use just one of them, it draws 125 watts.<ref>one {{B1}} loudspeaker connected draws up to 125 watts at 8 ohms</ref>

If you don't use the ~~B1s~~ at all, the amp that is normally used to drive them is idle.

If you don't use the {{B1}}s at all, the amp that is normally used to drive them is idle.

=== {{L1 CR}} ===

The {{L1 CR}} This is one loudspeaker that happens to break down into two pieces for travel.

This is driven by two separate amps, but this is not important because under normal circumstances both amps are driven identically. One drives the top half of the L1 and the other drives the bottom half. Because the L1 should always be operated as a single unit, what happens when you break it down isn't ~~important~~.

This is driven by two separate amps, but this is not important because under normal circumstances both amps are driven identically. One drives the top half of the {{L1 CR}} and the other drives the bottom half. Because the {{L1 CR}} should always be operated as a single unit, what happens when you break it down isn't relevant.

@@ Line 1: / Line 1: @@
 <big>''' A Holistic View of the L1&trade '''</big><ref>[http://bose.infopop.cc/groupee/forums/a/tpc/f/867107664/m/5551058832/r/5551058832 Originally appeared in the {{forum}}]</ref>
+== The {{L1}} System ==
 [[Image:SpeakerPower01.gif]]
@@ Line 12: / Line 13: @@
-{{B1}}s
+=== {{B1}}s ===
-If you break the pair of B1s in half, and use just one of them, it draws 125 watts.<ref>one {{B1}} loudspeaker connected draws up to 125 watts at 8 ohms</ref>
+If you break the pair of {{B1}}s in half, and use just one of them, it draws 125 watts.<ref>one {{B1}} loudspeaker connected draws up to 125 watts at 8 ohms</ref>
-If you don't use the B1s at all, the amp that is normally used to drive them is idle.
+If you don't use the {{B1}}s at all, the amp that is normally used to drive them is idle.
+=== {{L1 CR}} ===
 The {{L1 CR}} This is one loudspeaker that happens to break down into two pieces for travel.
-This is driven by two separate amps, but this is not important because under normal circumstances both amps are driven identically. One drives the top half of the L1 and the other drives the bottom half. Because the L1 should always be operated as a single unit, what happens when you break it down isn't important.
+This is driven by two separate amps, but this is not important because under normal circumstances both amps are driven identically. One drives the top half of the {{L1 CR}} and the other drives the bottom half. Because the {{L1 CR}} should always be operated as a single unit, what happens when you break it down isn't relevant.