Sennheiser EW-D: Difference between revisions

@@ Line 1: / Line 1: @@
 Notes
+;GAIN menu item
+Under the GAIN menu item, you can set the level of the audio signal coming from the coupled transmitter (e.g. vocals via EW-D SKM-S or guitar via EW-D SK).
+*Open the GAIN menu item.
+The item flashes on the display as follows.
+►
+[[File:EW-D_EM_Menu_Gain.gif]]
+*Press the UP or DOWN button to adjust the value.
+Make sure that the level indicator AF on the display is not too high. The LINK LED flashes yellow when the signal is overdriven.
+*Press the SET button to save the set value.
+Recommended settings for a unity gain link:
+Unity gain refers to the configuration where the audio signal arriving at a device leaves the device with the same level.
+Example: If you are using an EW-D wireless link instead of a guitar cable, with unity gain settings, the volume of the guitar in the guitar amplifier will be as high as it would be if using a guitar cable.
+Possible unity gain settings:
+*AF Out 18 dB | Gain 27 dB
+*AF Out 12 dB | Gain 33 dB
+*AF Out 6 dB | Gain 39 dB