Sennheiser EW IEM G4: Difference between revisions

@@ Line 21: / Line 21: @@
 }}
+== Sync Transmitter to Receiver(s) ==
+===Scan and transfer available frequencies to the Receiver ===
+;On the SR IEM G4 Transmitter
+#Open the Easy Setup menu item
+#Select RF Mute for Only This Device, press the jog dial to confirm the message and deactivate the radio signal for the transmitter.
+The blue light will appear and *SYNC will appear in the window indicating that the transmitter is ready to receive a frequency list from a transmitter.
+;On the EK IEM G4 portable Receiver
+#Perform a frequency scan on an EK IEM G4 portable receiver
+#From the scan results on the receiver, select a frequency bank with enough free channels.
+#Hold the infrared interface of the EK IEM G4 receiver in front of the infrared interface of an SR IEM G4 transmitter to transfer the scan results from the receiver to this transmitter.
+#*You will have the opportunity to select a different channel (but you don't need to). Press the jog dial to confirm the frequency selection. #*You will see the message STORED.
+===To SYNC the Transmitter to the Receiver===
+# On the Transmitter, press the SYNC button
+# On the Receiver, open the battery door to and hold the infrared interface of the EK IEM G4 receiver in front of the infrared interface of an SR IEM G4 transmitter to SYNC the frequency. The Transmitter will display a check mark when the units are SYNCd.
 == Stereo to Split Mono ==