Kemper Profiler: Difference between revisions

Line 67:

Set everything flat on the ToneMatch mixer and control the guitar sound on the Profiler. If necessary, use the [[zEQ]] or [[ParaEQ]] to solve acoustic issues at the venue. That is: Use the Profiler to create your guitar sound. If necessary, use the zEQ and ParaEQ on the ToneMatch to deal with the environment. That way, when you move to a different environment, you don't have to make changes to the Profiler.

==== Connections ====

Connect the Profiler Main Output to the ToneMatch mixer (since the ToneMatch mixer is the input to the FOH (Front of House))~~. Connect to a 1/4 (6.3) input. Use a 1/4 (6.3 mm) Tip-Sleeve cable~~.

Connect the Profiler Main Output to the ToneMatch mixer (since the ToneMatch mixer is the input to the FOH (Front of House)).

~~You also have the option~~ to ~~use an~~ XLR connection. That is preferable when you have cable runs in excess of 20 feet (six meters).

* Connect to a 1/4 (6.3) input. Use a 1/4 (6.3 mm) Tip-Sleeve cable.

* XLR connection. That is preferable when you have cable runs in excess of 20 feet (six meters).

:These are your main stereo outputs. Use these outputs to connect to a mixing desk in a recording studio, or to the

front-of-house mixer in a live situation. These outputs deliver the entire Rig: amp, cabinet, and all effects. You have a

choice of XLR (balanced) or quarter-inch TS-jacks (unbalanced). The XLR outputs are protected against 48V

phantom power fed by a mixing desk. However, you should avoid feeding phantom power into the PROFILER if you

want the best audio quality. Like all inputs and outputs, it offers a ground lift to prevent a loop hum.

Source: Kemper Main Manual

==== Settings ====

@@ Line 67: / Line 67: @@
 Set everything flat on the ToneMatch mixer and control the guitar sound on the Profiler. If necessary, use the [[zEQ]] or [[ParaEQ]] to solve acoustic issues at the venue. That is: Use the Profiler to create your guitar sound. If necessary, use the zEQ and ParaEQ on the ToneMatch to deal with the environment. That way, when you move to a different environment, you don't have to make changes to the Profiler.
 ==== Connections ====
-Connect the Profiler Main Output to the ToneMatch mixer (since the ToneMatch mixer is the input to the FOH (Front of House)). Connect to a 1/4 (6.3) input. Use a 1/4 (6.3 mm) Tip-Sleeve cable.
+Connect the Profiler Main Output to the ToneMatch mixer (since the ToneMatch mixer is the input to the FOH (Front of House)).
-You also have the option to use an XLR connection. That is preferable when you have cable runs in excess of 20 feet (six meters).
+* Connect to a 1/4 (6.3) input. Use a 1/4 (6.3 mm) Tip-Sleeve cable.
+* XLR connection. That is preferable when you have cable runs in excess of 20 feet (six meters).
+:These are your main stereo outputs. Use these outputs to connect to a mixing desk in a recording studio, or to the
+front-of-house mixer in a live situation. These outputs deliver the entire Rig: amp, cabinet, and all effects. You have a
+choice of XLR (balanced) or quarter-inch TS-jacks (unbalanced). The XLR outputs are protected against 48V
+phantom power fed by a mixing desk. However, you should avoid feeding phantom power into the PROFILER if you
+want the best audio quality. Like all inputs and outputs, it offers a ground lift to prevent a loop hum.
+Source: Kemper Main Manual
 ==== Settings ====