L1 Pro Daisy Chain: Difference between revisions

@@ Line 3: / Line 3: @@
 #Use an XLR female to 1/4 inch (6.3 mm) Tip-Ring-Sleeve to connect the L1 Pro Line Out to a second L1 Pro (any model) input three
-#Set the volume on the second L1 Pro to suit the application.
+# Turn down the volume on the second L1 Pro
+# Set the level you want on the first L1 Pro
+# Set the volume on the second L1 Pro to suit the application.
 ;Note:
@@ Line 13: / Line 18: @@
 [[File:L1 Pro Daisy Chain.jpg|400px|L1 Pro Daisy Chain]]
+; Second L1 Pro Louder than the First
+Because the output level of the first L1 Pro Line Out is post-fader (see above) is higher than the original source. If you set the volume controls on the second L1 Pro to the same settings as the first L1 Pro, the second one will be louder. Two get the levels the same,
+# Turn down the volume on the second L1 Pro
+# Set the level you want on the first L1 Pro
+# Set the volume on the second L1 Pro to suit the application. Do that by ear.
 ----
 [[Category:L1 Pro]]
 [[Category:Connections]]