Kemper Profiler: Difference between revisions
mNo edit summary |
|||
| Line 42: | Line 42: | ||
[[Kemper Profiler Recovery Options]] | [[Kemper Profiler Recovery Options]] | ||
=== Kemper Export/Import Performances === | |||
[[Kemper Export/Import Performances]] | |||
---- | ---- | ||
[[Category:Kemper]] | [[Category:Kemper]] | ||
[[Category:Guitar]] | [[Category:Guitar]] | ||
[[Category:ST]] | [[Category:ST]] | ||
Revision as of 01:32, 30 November 2020
- Approximate draw 12 watts
The Kemper Profiler with Remote
- Approximate draws approximately 17 watts
Factory Reset
From Kemper support:
1. First, consider creating a backup as this process will delete all user data and reset all global settings.
2. Upgrade to the current PROFILER operating system release software. If your Profiler is currently running a version older than 7.3.2 you need to update to that version first. You can find it here
https://www.kemper-amps.com/do…8/Older-Software-Versions
3. Switch the PROFILER Head or Rack model off and press and hold soft button 1 (left above the display) while powering it on into tuner mode. If you are a STAGE user press the soft button 1 and the SYSTEM button and power the unit on.
4. Keep holding the soft button until "System Maintenance " appears on the display.
5. In maintenance mode press "Recovery", "Init&Factory Content", "Yes", "Ok".
6. Then press the Reboot soft button and reboot or simply restart the PROFILER with the chicken-head knob.
Kemper Recovery Options
Kemper Profiler Recovery Options
Kemper Export/Import Performances
Kemper Export/Import Performances